Making settings using the Setup Navigator menu. Pioneer lx01bd

Add to My manuals
116 Pages

advertisement

Making settings using the Setup Navigator menu. Pioneer lx01bd | Manualzz

LX01BD_2.book Page 62 Friday, September 5, 2008 11:29 AM

02

Chapter 2

Getting Started

Important

• Press BD (HDMI 1) to set the remote control to BD control mode in order to operate the Blu-ray disc player.

INPUT

SELECT

HDMI 2

DVR

HDMI 3

DVD

 

TV

FM / AM

Setup Navigator

BD PLAYER

Please select the on-screen display language.

• The BD settings are listed on two separate pages. To cycle between pages, use the PAGE button.

Making settings using the

Setup Navigator menu

Be sure to perform these settings when using the player for the first time.

Caution

• Before turning on the power, check that the connections between the player and other devices are correct.

1 Turn on the power.

Press SYSTEM ON .

Audio, subtitle and BDMV/DVD-Video menu language will also be set.

When you have this player connected to a Pioneer Flat Screen TV that is compatible with HDMI Control, language settings are imported from the Pioneer Flat Screen TV’s language settings before

Setup Navigator begins.

4 Select and set the video and audio output terminals.

Select the actually connected video and audio output terminals.

This system uses the HDMI terminal.

Use

/

/

/

to select HDMI for both Video and Audio , then press ENTER .

Proceed to Step 5.

TOP MENU

DISC

NAVIGATOR

TOOLS

MENU

HOME

MENU

SETUP

RETURN

OFF

HDMI 1

BD

INPUT

TV

HDMI 2

DVR

HDMI 3

DVD TV

2 Turn on the TV’s power and switch the input.

See the TV’s operating instructions for instructions on operating the

TV.

Check that the Setup Navigator menu is displayed.

If TV Control is set, the TV can be operated with the receiver subwoofer’s remote control (page 64).

If the Setup Navigator menu is not displayed

Press HOME MENU to display the Home Menu, select Initial

Setup

Setup Navigator

Start, then press ENTER.

3 Select the OSD language.

Use

/

to select, then press ENTER .

TOP MENU

DISC

NAVIGATOR

TOOLS

MENU

Setup Navigator

BD PLAYER

Select the output terminals to be used for the video and audio signals of this player.

Video HDMI

Audio HDMI

Use [ ][ ] to select video or audio, then press [ ][ ] to select the output terminal.

• When Component Video is selected for Video , proceed to step 6.

• When S-Video/Video is selected for Video , proceed to step 7.

Setting item

HDMI

Output terminal name

HDMI Output

Component Video Video Output

S-Video/Video

Component Video

S-Video

HDMI

Digital Audio

Analog Audio

Video

HDMI Output

Digital Audio

Output

Optical

Audio Output (2 ch)

Audio Output (7.1 ch)

HOME

MENU

SETUP

RETURN

62

En

Downloaded from www.Manualslib.com

manuals search engine

LX01BD_2.book Page 63 Friday, September 5, 2008 11:29 AM

Caution

• When HDMI is selected for Video , no video signals are output from the COMPONENT VIDEO , S-VIDEO or VIDEO output terminals.

• When Component Video or S-Video/Video is selected for

Video , no video signals are output from the HDMI OUT terminal.

• The video and audio signals output from the set output terminals are output synchronously (lip synchronization).

• Linear PCM audio signals (2 channels) are output from all terminals other than the ones selected for Audio , regardless of the audio format or the player’s settings.

5 Select and set the HDMI High-Speed Transmission setting.

Use

/

to select On , then press ENTER .

TOP MENU TOOLS

DISC

NAVIGATOR

MENU

HOME

MENU

SETUP

RETURN

7 Select the aspect ratio of your TV.

Use

/

to select, then press ENTER .

Setup Navigator

BD PLAYER

Select the screen aspect ratio to match your TV.

8 Check the settings.

Select Proceed , then press ENTER .

Setup Navigator

BD PLAYER

Select [Proceed] if you want to start testing your audio and video settings.

Proceed

Setup Navigator

BD PLAYER

Select the HDMI Hi-speed transmission setting.

On Off

Normally select [On] (Recommended).

Select [Off] if the video or audio of HDMI-connected was not output in the test output.

• When HDMI High-Speed Transmission is set to Off , use the supplied HDMI cable or a High Speed HDMI™ cable. The picture and sound may not be output properly if any other HDMI cable

(standard HDMI™ cable) is used.

• When HDMI is selected for Video , proceed to step 8.

• When Component Video is selected for Video , proceed to step 6.

• When S-Video/Video is selected for Video , proceed to step 7.

6 Select the output video resolution from the COMPONENT

VIDEO output terminals.

Use

/

to select, then press ENTER .

Setup Navigator

BD PLAYER

Select the output video resolution at the

Component video terminal.

9 Output test tones.

Use

/

to select Yes , then press ENTER .

Setup Navigator

BD PLAYER

The test tone will be output.

Reduce the volume to an appropriate level.

Caution

Yes

• The screen in step 10 and test tones are output simultaneously according to the settings in steps 4 to 7. Lower the volume of the devices connected with the player.

No

The video and/or audio may not be output under certain setup.

The setup menu comes back in 30 seconds.

02

If you select [Source Direct], the output resolution is determined according to the video format of the playing source.

For details on the resolution settings, see Switching the output video resolution on page 65.

63

En

Downloaded from www.Manualslib.com

manuals search engine

advertisement

Related manuals

advertisement

Table of contents