Adjusting the Audio DRC. Pioneer lx01bd

Add to My manuals
116 Pages

advertisement

Adjusting the Audio DRC. Pioneer lx01bd | Manualzz

LX01BD_2.book Page 80 Friday, September 5, 2008 11:29 AM

04

Note

• Prog.Motion

and Pure Cinema have the effect only for pictures recorded in the interlaced scan format (576i/480i or 1080i signals).

• Prog.Motion

is disabled when Pure Cinema is set to On .

• Black Setup have the effect only for pictures output from the

VIDEO and S-VIDEO output terminals, and for NTSC signals output.

• YNR , CNR , BNR and MNR are disabled when 1080/24p signals are output from the HDMI OUT terminal.

Closing the Video Adjust screen

Press HOME MENU .

About Pure Cinema

There are two types of video signals:

• Video material – Video signals recorded at 25 or 30 frames/ second

• Film material – Video signals recorded at 24 frames/second

“Pure Cinema” uses signal processing suited for “film material” when converting 576i/480i or 1080i interlaced video signals into progressive video signals, resulting in clear picture reproduction without losing the quality of the material.

is displayed on the disc information screen when playing the

“film material” pictures of DVD-Video discs (page 70).

Adjusting the Audio DRC

3 Adjust the setting.

Use

/

to switch between Off , Low , Medium , High and Auto .

TOP MENU

DISC

NAVIGATOR

TOOLS

MENU

HOME

MENU

SETUP

RETURN

Audio DRC

Off

Adjust the audio dynamic range. This setting is ineffective depending on the playing audio.

Closing the Audio DRC screen

Press ENTER or HOME MENU .

Note

• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby

Digital audio signals of BDs, DVDs and movie files.

• When Auto is selected, the setting has the same effect as High or Off for Dolby TrueHD signals, depending on the content. For

Dolby Digital Plus and Dolby Digital, the setting has the same effect as Off .

• Audio DRC affects the audio signals output from the following audio output terminals:

– Analog audio signals output from the AUDIO OUT (2 ch) or

AUDIO OUT (7.1 ch) terminals.

– Linear PCM audio signals output from the DIGITAL OUT terminals or HDMI OUT terminal.

• The effect may be weak for some discs.

Audio DRC (Dynamic Range Control) has the effect of playing loud sounds softly and soft sounds loudly. Adjust the setting for example when watching movies late at night and the dialogs are difficult to hear.

1 During playback, display the TOOLS menu.

Press TOOLS .

DISPLAY LIGHT

PAGE

TOP MENU

DISC

NAVIGATOR

MENU

2 Select and set Audio DRC.

Use

/

to select, then press ENTER .

TOP MENU

DISC

NAVIGATOR

TOOLS

MENU

BD PLAYER

TOOLS

HOME

MENU

SETUP

RETURN

Audio

Subtitle

Audio DRC

Video Adjust

Output Video Resolution

80

En

Downloaded from www.Manualslib.com

manuals search engine

advertisement

Related manuals

advertisement

Table of contents