Changing the settings (Initial Setup). Pioneer lx01bd

Add to My manuals
116 Pages

advertisement

Changing the settings (Initial Setup). Pioneer lx01bd | Manualzz

LX01BD_2.book Page 81 Friday, September 5, 2008 11:29 AM

Chapter 5

Advanced settings

Important

• Press BD (HDMI 1) to set the remote control to BD control mode in order to operate the Blu-ray disc player.

INPUT

SELECT

HDMI 2

DVR

HDMI 3

DVD

 

TV

FM / AM

3 Select the item and change the setting.

Use

/

/

/

to select, then press ENTER .

TOP MENU TOOLS

DISC

NAVIGATOR

MENU

HOME

MENU

SETUP

RETURN

Closing the Initial Setup screen

Press HOME MENU .

• The BD settings are listed on two separate pages. To cycle between pages, use the PAGE button.

Changing the settings (Initial

Setup)

Operating the Initial Setup screen

1 When playback is stopped, display the Home Menu screen.

Press HOME MENU .

HOME

MENU RETURN

2 Select and set Initial Setup.

Use

/

to select, then press ENTER .

TOP MENU TOOLS

DISC

NAVIGATOR

MENU

HOME

MENU

SETUP

HOME MENU

BD PLAYER

Home Media Gallery

Initial Setup

RETURN

Set up the player for use.

05

81

En

Downloaded from www.Manualslib.com

manuals search engine

LX01BD_2.book Page 82 Friday, September 5, 2008 11:29 AM

05

Note

• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.

• In Options, the factory default settings are indicated in bold.

Setting

TV Aspect Ratio

Options

16:9 (Widescreen)

4:3 (Standard)

Explanation

Select this when connected to a wide (16:9) TV.

Select this when connected to a conventional TV.

4:3 Video Out

DVD 16:9 Video Out

Full

Normal

Letter Box

Pan & Scan

4:3 pictures are displayed over the entire screen.

4:3 pictures are displayed with black bands along the sides. Select this when you cannot switch the aspect ratio to 4:3 on the TV.

16:9 pictures are displayed with black bands at the top and bottom when watching on a 4:3 screen.

The picture is displayed over the entire screen, with the left and right sides of the 16:9 picture cut off. Select this to watch 4:3 pictures over the entire screen.

NTSC on PAL TV Select this when connected to the PAL-only TV. When playing the materials with the frame/ field rate other than 50 Hz, the PAL-only TV can display correctly.

Off Select this when multi-system (NTSC-compatible) TV.

Many recent PAL TVs support the input of NTSC signals. Therefore, this can be set to Off . Check also the operating instructions of your TV.

Still Picture

On

Field

Frame

This eliminates instability of the picture when playback is paused.

This makes pictures clear when playback is paused, but instability may be observed.

Dolby Digital Out

* Only valid for digital audio outputs.

DTS Out

* Only valid for digital audio outputs.

AAC Out

* Only valid for digital audio outputs.

DTS Downmix

Audio Output Mode

* Only valid for analog audio outputs.

Speaker Setup

* Only valid for analog audio outputs.

Channel Level

* Only valid for analog audio outputs.

Auto

Dolby Digital 1

Dolby Digital 2

Dolby Digital

PCM

Field or Frame is switched automatically according to the disc or file being played.

Dolby Digital audio signals are output. With BD-ROMs, the secondary audio and interactive audio are mixed for output.

Dolby Digital audio signals are output. With BD-ROMs, the signals are output without mixing the secondary audio and interactive audio signals.

Select this when the connected AV receiver or amplifier, etc., is not compatible with Dolby

Digital audio signals. The Dolby Digital audio signals are converted into linear PCM audio signals for output.

DTS 1

DTS 2

DTS

AAC

PCM

DTS Digital Surround audio signals are output. With BD-ROMs, the secondary audio and interactive audio are mixed for output.

DTS Digital Surround audio signals are output. With BD-ROMs, the signals are output without mixing the secondary audio and interactive audio signals.

Select this when the connected AV receiver or amplifier, etc., is not compatible with DTS

Digital Surround audio signals. The DTS Digital Surround audio signals are converted into linear PCM audio signals for output.

Select this when the connected AV receiver or amplifier, etc., is compatible with AAC audio signals. The AAC audio signals are output.

AAC

Stereo

PCM Select this when the connected AV receiver or amplifier, etc., is not compatible with AAC audio signals. The AAC audio signals are converted into linear PCM audio signals for output.

DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital

Surround audio signals converted to linear PCM audio signals are converted into 2-channel

(stereo) signals for output.

Lt/Rt

2 Channel

Multi-channel

DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital

Surround audio signals converted to linear PCM audio signals are converted into 2-channel signals compatible with Dolby Surround for output (when the connected AV receiver or amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the linear PCM audio signals as surround audio signals).

Select this when the TV’s analog 2-channel (stereo) audio input terminals are connected to the player’s AUDIO OUT (2 ch) terminals.

Select this when the multi-channel audio input terminals of an AV receiver or amplifier, etc., are connected to the player’s AUDIO OUT (7.1 ch) terminals.

When an AV receiver or amplifier, etc., is connected to the player’s AUDIO OUT (7.1 ch) terminals, this sets whether or not to use the speakers which are connected to the AV receiver or amplifier, as well as the size of the speakers. For details, see Changing the speaker setup on page 85.

Fix

Variable

The output for the various speakers is set to the maximum.

The output level of the various speakers is set within the range of –6.0 dB to +6.0 dB (in 0.5 dB steps) (page 85).

82

En

Downloaded from www.Manualslib.com

manuals search engine

LX01BD_2.book Page 83 Friday, September 5, 2008 11:29 AM

Setting Options

HDMI High-Speed Transmission On

Explanation

Select this when connected with a High Speed HDMI™ cable (page 91).

Off Select this when connected with a Standard HDMI™ cable (page 91).

The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High-Speed Transmission setting.

When HDMI High-Speed Transmission is set to On , use the supplied HDMI cable.

HDMI Color Space Auto The video signal that is output (YCbCr or RGB) is switched automatically.

YCbCr 4:4:4

YCbCr 4:2:2

Select this to output the video signals as YCbCr 4:4:4 signals.

Select this to output the video signals as YCbCr 4:2:2 signals.

RGB (16 to 235)

RGB (0 to 255)

Select this to output the video signals as RGB signals. Choose this if the colors seem too dense and all the dark colors are displayed in a uniform black when RGB (0 to 255) is selected.

Select this to output the video signals as RGB signals. Choose this if the colors seem too faint and the black seems too bright when RGB (16 to 235) is selected.

Normally it is recommended to set this to Auto . When set to Auto , the optimum video signals for your TV are output.

HDMI Audio Out Auto The signals are output with as many audio channels as possible. In cases when the number of channels does not decrease when the signals are output as such without converting them to linear PCM, they are output as such (page 90).

PCM Select this when you want the secondary audio and interactive audio signals to be mixed for output or when you want to output prioritizing sampling frequency over the number of channels (page 90).

Enables PQLS function (page 92).

PQLS

HDMI Control

Auto

Off

On

Off

Disables PQLS function (page 92).

Select this to control the player with the remote control of the AV device connected using an HDMI cable. Also refer to About HDMI Control function on page 92.

Select this when you do not want to control the player with the remote control of the AV device connected using an HDMI cable.

Select this to set the language of the on-screen displays to English.

OSD Language

Audio Language

* For some discs, it may not be possible to change to the selected language.

Subtitle Language

English available languages

English available languages

Other

English

* For some discs, it may not be possible to change to the selected language.

available languages

Choose a language for the on-screen displays from the listed languages.

Select this to set both the BD-ROM and DVD-Video default audio language to English.

Choose a language from the listed languages to set the default audio language for BD-ROM and DVD-Video playback.

Continue to the next screen to set the default audio language for BD-ROM and DVD-Video playback. You can select the language name or enter the code number (see page 100 for the code table). If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.

Select this to set the default subtitle language for BD-ROM and DVD-Video playback to

English.

Choose a language from the listed languages to set the default subtitle language for BD-

ROM and DVD-Video playback.

Other Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video playback. You can select the language name or enter the code number (see page 100 for the code table). If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.

BDMV/DVD-Video Menu Lang.

* For some discs, it may not be possible to change to the selected language.

w/Subtitle Language Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle language.

available languages Choose a language from the listed languages to set the default language for BD-ROM and

DVD-Video menus.

Other Continue to the next screen to set the default menu language for BD-ROM and DVD-Video menus. You can select the language name or enter the code number (see page 100 for the code table). If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.

Subtitle Display On

Off

Select this to display the subtitles.

Select this if you do not want to display the subtitles. Note that on some discs the subtitles are displayed by force.

Set Password (Change Password) Register (change) the password for parental lock settings or for unlocking to play DVD-Video with parental lock feature. For details, see Registering or Changing the password on page 86.

DVD-Video Parental Lock Change the player’s parental lock level. For details, see Changing the Parental Lock level for watching DVDs on page 87.

BDMV Parental Lock

Country Code

Change the restricted age. For details, see Changing the Age Restriction for watching BD-ROMs on page 87.

Change the Country/Area code. Refer to the Changing the Country/Area code on page 88.

05

83

En

Downloaded from www.Manualslib.com

manuals search engine

advertisement

Related manuals

advertisement

Table of contents