Others. Pioneer lx01bd

Add to My manuals
116 Pages

advertisement

Others. Pioneer lx01bd | Manualzz

LX01BD_2.book Page 99 Friday, September 5, 2008 11:29 AM

Others

Problem

The power turns off automatically.

The power turns on automatically.

Inputs of connected TV and this receiver subwoofer, switches automatically.

Check

Is

Is

Is

Auto Power Off

HDMI Control

HDMI Control

set to

set to

set to

On

On

On

?

?

?

Remedy

If Auto Power Off is set to On , the power turns off automatically if no operation is performed for over 30 minutes

(page 84).

The player’s power may turn off together with the power of the connected TV. If you do not want the player’s power to turn off when the TV’s power is turned off, set HDMI Control to Off

(page 83).

The player’s power may turn on together with the power of the connected TV. If you do not want the player’s power to turn on when the TV’s power is turned on, set HDMI Control to Off

(page 83).

Is HDMI Control set to On ?

The inputs of the connected TV or this receiver subwoofer may automatically switch to the player when playback starts on the player or the menu screen (Home Media Gallery, etc.) is displayed. If you do not want the inputs of the connected TV and/or this receiver subwoofer to switch automatically, set

HDMI Control to Off (page 83).

Are you operating the remote control from a point too far away from the display unit?

Operate from within 7 m of the display unit’s remote control sensor.

Player cannot be operated with remote control.

Are the batteries dead?

Settings you have made have been cleared.

• Have you disconnected the power cord while the player’s power was on?

• Has there been a power failure?

Replace the batteries (page 25).

If the power cord is disconnected or there is a power failure while the player’s power is on, the settings you have made may be cleared. Always press  STANDBY/ON on the player’s front panel or  STANDBY/ON on the remote control and check that POWER OFF has turned off from the player’s front panel display before disconnecting the power cord. Be particularly careful when the power cord is connected to the

AC outlet on another device because the player turns off in conjunction with the device. We recommend plugging the power cord into a wall outlet whenever possible.

After a disc is inserted,

Loading stays displayed and playback does not start.

Are there too many files recorded on the disc?

 is displayed in file names, etc.

The DVD layer of BD and DVD hybrid discs cannot be played.

Is Hybrid Disc Playback properly set?

Is Hybrid Disc Playback properly set?

The CD layer of BD and CD hybrid discs cannot be played.

The Hybrid Disc Playback setting cannot be changed

(displayed in gray).

BDMV/BDAV Playback

Priority setting cannot be changed (displayed in gray).

Is a disc set in the disc tray?

Is a disc set in the disc tray?

When a disc on which files are recorded is inserted, depending on the number of files recorded on the disc, loading may take several dozen minutes.

The characters that cannot be displayed on this player are displayed in  .

Set Hybrid Disc Playback to DVD (page 84).

Set

The

The

Hybrid Disc Playback

Hybrid Disc Playback

BDMV/BDAV Playback Priority setting cannot be changed when a disc is set. Remove the disc, then change the setting.

to CD (page 84).

setting cannot be changed when a disc is set. Remove the disc, then change the setting.

07

99

En

Downloaded from www.Manualslib.com

manuals search engine

advertisement

Related manuals

advertisement

Table of contents