Front Panel. Luxor LUX-TUTV-500GB

Viewing Controls and Connections of the Set-Top-Box

Front Panel

Rear Panel

1. USB INPUT (for service use only)

2. ANTENNA IN : You can connect antenna to aerial input of the box.

3. ANTENNA OUT : You can use aerial antenna out to connect aerial to your TV.

4. OPTICAL AUDIO : You can use this connector to output the digital audio to an external device. See your audio system instruction book for further information.

5. TV SCART : If your TV has a scart connector, you can connect the box to your TV using a scart cable.

6. POWER SUPPLY : DC IN (12V) power connection.

Make sure that you connect all cables and connections before you plug the unit into the mains supply. After you connect the unit to the mains supply, the LED light located on the front panel will be red (Standby mode).

English - 5 -