advertisement
First Time Installation
IMPORTANT: Ensure that the aerial is connected before switching on the set top box for the rst installation.
• When the set-top-box is operated for the rst time, installation wizard will guide you through the process. First, TV Type selection on-screen menu will be displayed:
Adjusting the Volume
Mute
• You can press to mute the sound of your settop-box. The sound will be muted once this button is pressed.
• To cancel mute, you can press use the V +/ buttons.
Volume Up / Down
button again or
• You can increase or decrease the volume by using
V+ / V buttons.
• Select the TV Type by using “ ”/“ ” buttons and press OK button to continue.
• To start installation process, select Yes by using
“ ”/“ ” buttons and then press the OK button.
• The box will start to search available stations. The progress bar will move along the line. You should allow the set-top-box to complete the search to store all available stations.
• The volume level selected will remain set, even when the receiver is turned off and on again, until you change volume again.
• The audio volume adjustment for the receiver is independent of the volume control on your TV set.
IMPORTANT: You should be careful that both volume controls are kept within reasonable levels so that when switching on, or when rst turning on your TV set, the sound level is not too high.
On-Screen Information
• You can press INFO button to display on-screen information. Details of the station and current programme will be displayed on the information screen.
• Particularly; current event name, next event name, and starting and ending time, duration bar, programme mode, channel number and name will be displayed on the information screen (if available).
Note: You can press MENU button to cancel.
Changing Channels
• You can change channels with the following methods.
• You can press the numeric buttons (0–9) to directly enter the channel number. You can press numeric buttons consecutively to enter two or more digits.
• Press the PR +/ PR buttons to move up or down to the next available channel.
Note : You can press OK button to display the channel list.
English - 10 -
advertisement
Related manuals
advertisement
Table of contents
- 4 Safety Precautions
- 4 Power
- 4 Power Cord
- 5 Overview of the Remote Control
- 6 Front Panel
- 6 Rear Panel
- 7 Inserting Batteries in the Remote Control
- 7 Connecting the Set-Top Box to a TV Set
- 8 Antenna Connection
- 10 Important - Hard Disk Information
- 10 Recording Format
- 11 First Time Installation
- 11 Changing Channels
- 11 Adjusting the Volume
- 11 Volume Up / Down
- 11 On-Screen Information
- 12 Time Shifting (Pause Live Recording)
- 12 Menu System
- 12 Viewing the Main Menu
- 12 Information Banner
- 13 c Channel
- 13 Operating the Channel List
- 13 Deleting Channels
- 13 Deleting Multiple Channels
- 13 Renaming Channels
- 13 Adding Locks to Channels
- 13 Locking Multiple Channels
- 13 Setting Favourites
- 14 Event Options
- 14 Select Channel & Exit
- 14 Record / Delete Record Timer
- 14 Record Series/Delete Series
- 16 Play Options
- 17 Main Title
- 17 Recording Title
- 17 Duration
- 17 Displaying Chapter Options
- 18 Max Time Shift
- 18 Auto Discard
- 18 Active channels
- 18 Scan Encrypted
- 18 Output Settings
- 18 TV Type
- 19 TV Out
- 19 Receiver Upgrade
- 19 Menu Locking
- 19 Menu Lock
- 19 Set Pin
- 19 Low Power
- 19 Auto Standby
- 20 guring Language Preferences
- 20 Preferred
- 20 Current (*)
- 20 Automatic Channel Scan / Retune
- 20 Manual Channel Scan
- 21 Format Disk
- 21 First Time Installation
- 21 HDD Initialisation
- 21 No Signal
- 21 No Channels Have Been Added Yet
- 24 GENERAL CHARACTERISTICS