Tasks/Commands. Symmetricom TimeSource 500

Add to My manuals
306 Pages

advertisement

Tasks/Commands. Symmetricom TimeSource 500 | Manualzz

S S S S S S S S S S S S S S S S S S S S S S S S S S S S S

Procedure I. TimeWizard Installation and Operation (cont’d)

Step

5

Procedure

From the Windows desktop, click Start

Programs

TimeWizard to start the

TimeWizard application. When TimeWizard starts, the “TimeWizard” main screen appears:

1

3

4

The version of TimeWizard that is installed is indicated at the top right of the screen. The progress indicator at the bottom of the screen shows which of the seven screens you are currently viewing.

Note that the factory default TimeSource username of “telecom” and password of “TS3000!!” appear in the Login Information area of the screen.

TimeSource 3500

Installation

097-72050-01 Issue 7: August 2003

143

5

3

S S S S S S S S S S S S S S S S S S S S S S S S S S S S S

Procedure I. TimeWizard Installation and Operation (cont’d)

Step

6

7

Procedure

If the user name or password of the TimeSource have been changed, enter the proper user name or password, otherwise, continue with the next step.

To select the high-speed download option, in which the firmware download takes place at approximately 12 times the default speed of 9600 baud, select the Use High Speed (115K baud) check-box, then click the Next>> button to progress to the next screen.

If you do not wish to use the high-speed download option, leave the Use High

Speed (115K baud) check-box unselected and click the Next>> button.

Note: In most cases, it is desirable to proceed with the Use High Speed

(115K baud) check-box selected. In certain instances, as when the PC’s communications port does not support a 115K baud rate, de-select the Use

High Speed (115K baud) check-box before proceeding.

144

TimeSource 3500

Installation

097-72050-01 Issue 7: August 2003

advertisement

Related manuals

advertisement