Flywheel, replacing. Volvo Penta TWD1620GH, TWD1630P, TAD1630G, TAD1631G, TAD1630GE, TWD1630G, TAD1631GE, TAD1630P, TAD1630V, TWD1630V

1

Service procedures - engine

Flywheel, replacing

(Clutch removed)

Group 21

7

Fit the flywheel and the bolts.

8

Torque the flywheel to 260 Nm (191.8 ft-lb).

Remove the flywheel bolts.

2

Screw two bolts into the flywheel.

3

Using the bolts, lift off the flywheel.

4

Clean the crankshaft flange contact surface.

5

Check the guide pin, replace it if damaged.

6

Clean the flywheel contact surface which mates with the crankshaft flange. Fit a new flywheel bearing (Power Pack engines).

72