Safety instructions for all applications. Parkside PWSA 20-Li B3, 331789 1907

Safety instructions for all

applications

Special safety instructions for grinding and abrasive cutting: abrasive cutting appliance. Please follow all safety instructions, instructions, diagrams and data that you receive with the appliance.

If you do not observe the following instructions, this can lead to an electrical shock, fire and/or serious injuries.

sanding, working with a steel brush or burnishing.

Using the power tool for applications for which it is not designed can lead to hazards and injuries.

specifically provided or recommended by the manufacturer for this power tool.

Just because you can attach the accessories to your power tool does not guarantee they are safe to use.

used must be at least as high as the maximum speed specified for the power tool.

Accessories that rotate faster than the permissible rate can break and throw pieces into the air.

accessory tool used must comply with the dimensions of the power tool.

Incorrectly dimensioned accessory tools cannot be sufficiently shielded or controlled.

match the thread of the grinding spindle exactly. For attachment tools that are mounted using a flange, the diameter of the hole on the attachment tool must correspond to the width of the fitment on the flange. Accessory tools that cannot be fitted precisely onto the power tool will rotate unevenly, vibrate severely and can lead to a loss of control.

accessory tools such as grinding discs before each use for chips or cracks, grinding plates for cracks, wearing or excessive wear and tear and wire brushes for loose or broken wires. If the power tool or the accessory tool

■

60 

│

 

GB │ MT in use is dropped, check to see if it is damaged or use an undamaged accessory tool.

When you have checked and inserted the accessory tool, ensure that you and any other people in the vicinity remain outside of the level of the rotating accessory tool and allow the tool to rotate at maximum speed for one minute.

Damaged accessories usually break during the test period.

Depending on the application, ensure that you use full face protection, eye protection or goggles. Use a dust mask, hearing protection, protective gloves or special apron to protect yourself from grindings and material particles as required.

Protect your eyes from flying debris that may be created during certain applications. Dust or filter masks must be used to filter any dust created by the application. If you are exposed to loud noise for any length of time, you may suffer hearing loss.

distance from your workspace. Anyone who enters the workspace must wear personal protective equipment.

Fragments of the workpiece or broken accessory tools can fly off and cause injury – even outside the immediate working area.

handles when you are carrying out work in which the accessory tool may come into contact with concealed power cables.

Contact with a live cable can also make metal parts of the appliance live and could result in an electric shock.

accessories.

If you lose control of the appliance, the cord may get caught or cut and your hand or arm could get caught in the rotating accessory tool.

accessory tool being used has come to a complete standstill.

The rotating accessory tool can come into contact with the surface and cause you to lose control of the power tool.

PWSA 20-Li B3