Feature lighting
The interior lighting can be set to remain on when the door is closed so your wines can be on display at all times.
Each wine conditioning zone has its own lighting strip so all zones are illuminated.
Thanks to the use of LED lighting, the wine will not be adversely affected by heat or UV light.
Switching the feature lighting on and off
Touch the On/Off sensor for the feature lighting so that it is highlighted in yellow.
The interior lighting is now switched on, even when the appliance door is closed.
To switch the feature lighting off again:
Touch the On/Off sensor for the feature lighting so that it is no longer highlighted in yellow.
The interior lighting is now switched off when the appliance door is closed.
Setting the brightness of the feature lighting
The brightness of the feature lighting can be adjusted.
Touch the On/Off sensor for the feature lighting so that it is highlighted in yellow.
Touch the sensor for the feature lighting again for approximately 4 seconds until flashes in the display (after 2 seconds, will flash).
Use the sensors for altering the temperature to set the feature lighting brightness ( and ). To do this, touch and hold the sensors. The brightness is adjusted directly and is infinitely variable. The results are not visible in the display.
By touching the sensor:
– The lighting becomes dimmer.
– The lighting becomes brighter.
37
