DSP750 In-wall Digital Active Loudspeaker
User Guide
10
Front and back panel
Connections
The following diagram gives details of the connections on the back of the loudspeaker:
SpeakerLink output input Power
Use this connection
SpeakerLink input
SpeakerLink output
Power
To connect to this
The SpeakerLink output of a Meridian controller or another loudspeaker when connecting in a daisy-chain.
The SpeakerLink input of another loudspeaker when connecting in a daisy-chain.
The RF600 wall box power output using the supplied plug-in mains cable.
Front panel
The following diagram gives details of the front panel:
Indicators and
IR receiver
Channel selector
Power switch
Item
Channel selector
RS232 socket
Power switch
RS232 socket
Description
Specifies the loudspeaker’s role in the system. See Setting up the DSP750
Loudspeaker , page 12.
Allows you to configure the loudspeaker.
See RS232 via the front-panel socket , page 16.
Controls the mains supply to the loudspeaker.
11 DSP750 In-wall Digital Active Loudspeaker
User Guide
Status indicators
Status
Steady blue
Steady white
Description
Loudspeaker in standby.
Loudspeaker operating.
For an explanation of the configuration status indicators see
Configuring the loudspeaker using the IR eye, page 14.
