advertisement
PowerFlex 755 IP00, NEMA/UL Open Type Drive
Lifting
IMPORTANT Consult the enclosure manufacturers documentation for proper enclosure lifting procedures.
ATTENTION: To guard against possible personal injury and/or equipment damage:
• Inspect all lifting hardware for proper attachment before lifting drive or enclosure.
• Do not allow any part of the drive, enclosure or lifting mechanism to make contact with electrically charged conductors or components.
• Do not subject the drive or enclosure to high rates of acceleration or deceleration while transporting to the mounting location or when lifting.
• Do not allow personnel or their limbs directly underneath the drive or enclosure when it is being lifted and mounted.
The approximate maximum drive component weights are listed below.
Component
Pod
Converter/DC Input with Precharge
Inverter
Drive Assembly (Open, IP00)
Weight kg (lb)
AC Input
5 (10)
64 (140)
222 (490)
286 (630)
Common DC Input
5 (10)
64 (140)
165 (363)
229 (504)
Vertical Lifting
Attach Lifting Hardware
>1/2 A
<45°
A
>1/2 A
<45°
A
36 Rockwell Automation Publication 750-IN020D-EN-P - May 2017
Moving the Drive Assembly to a Vertical Position
PowerFlex 755 IP00, NEMA/UL Open Type Drive
IMPORTANT When approaching the full upright (vertical) position, be aware of the wheels at the bottom of the drive assembly. Blocking the wheels may be necessary to guard against undesired movement.
IMPORTANT Remove shipping brackets prior to installation.
Rockwell Automation Publication 750-IN020D-EN-P - May 2017 37
advertisement
