Who Should Use this
Manual
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
• conventions used in this manual
•
Rockwell Automation support
Use this manual if you are responsible for designing, installing, programming, or troubleshooting control systems that use
Allen-Bradley programmable controllers.
You should have a basic understanding of electrical circuitry and familiarity with relay logic. If you do not, obtain the proper training before using this product.
Purpose of this Manual
This manual is a reference guide for Compact I/O 1769-SDN
DeviceNet Scanner Module. It describes the procedures you use to install, program, and troubleshoot your module. This manual:
• provides instructions on installing the module
• contains information about using the module on DeviceNet
• provides tips on troubleshooting the module
• contains application examples to show how the module is used with various programmable controllers
1
Allen-Bradley Drives
Publication 1769-UM009B-EN-P - May 2002
Preface 2
Related Documentation
The following documents contain additional information concerning
Rockwell Automation products. To obtain a copy, contact your local
Rockwell Automation office or Allen-Bradley distributor.
For
Information on understanding and applying micro controllers.
Information on mounting and wiring the 1769-SDN module.
Read this Document Document Number
MicroMentor 1761-MMB
Compact I/O 1769-SDN DeviceNet Scanner
Module Installation Instructions
1769-IN060
Information on RSNetWorx for DeviceNet (catalog number
9357-DNETL3).
Detailed information on planning, mounting, wiring, and troubleshooting your CompactLogix system.
Detailed information on planning, mounting, wiring, and troubleshooting your MicroLogix 1500 system.
Information on installing, configuring, and using Compact I/O Analog modules.
Detailed description of how to install and use the DeviceNet Interface
(catalog number 1761-NET-DNI).
DeviceNet network planning information.
RSNetWorx for DeviceNet Technical Data
CompactLogix System User Manual
MicroLogix 1500 Programmable Controllers
User Manual
1764-UM001
Compact I/O Analog Modules User Manual 1769-UM002
DeviceNet Interface user Manual
9398-DNETTD
-AUG00
1769-UM007
1761-6.5
Information on DF1 open protocol.
DeviceNet Cable System Planning and
Installation Manual
DF1 Protocol and Command Set Reference
Manual
DN-6.7.2
1770-6.5.16
In-depth information on grounding and wiring Allen-Bradley programmable controllers
A description of important differences between solid-state programmable controller products and hard-wired electromechanical devices
Allen-Bradley Programmable Controller
Grounding and Wiring Guidelines
Application Considerations for Solid-State
Controls
1770-4.1
SGI-1.1
An article on wire sizes and types for grounding electrical equipment National Electrical Code - Published by the National Fire Protection
Association of Boston, MA.
Allen-Bradley Publication Index SD499 A complete listing of current documentation, including ordering instructions. Also indicates whether the documents are available on
CD-ROM or in multi-languages.
A glossary of industrial automation terms and abbreviations
Or visit www.theautomationbookstore.com.
Allen-Bradley Industrial Automation
Glossary
AG-7.1
Publication 1769-UM009B-EN-P - May 2002
Common Techniques Used in this Manual
The following conventions are used throughout this manual:
•
Bulleted lists such as this one provide information, not procedural steps.
•
Numbered lists provide sequential steps or hierarchical information.
•
Italic type is used for emphasis.
Preface 3
This symbol identifies helpful tips.
TIP
Allen-Bradley Drives
Publication 1769-UM009B-EN-P - May 2002
Preface 4
Rockwell Automation
Support
Rockwell Automation offers support services worldwide, with over 75
Sales/Support Offices, 512 authorized Distributors and 260 authorized
Systems Integrators located throughout the United States alone, plus
Rockwell Automation representatives in every major country in the world.
Local Product Support
Contact your local Rockwell Automation representative for:
• sales and order support
• product technical training
• warranty support
• support service agreements
Technical Product Assistance
If you need to contact Rockwell Automation for technical assistance,
please review the Troubleshooting information in chapter 8 first. Then
call your local Allen-Bradley distributor or Rockwell Automation
Technical Support. (phone 440-646-5800)
For Rockwell Software products, use the following contact information:
• web site - http://www.rockwellsoftware.com
• technical support - 440-646-7800
• presale information - 414-321-1515
Your Questions or Comments on this Manual
If you find a problem with this manual, or you have any suggestions for how this manual could be made more useful to you, please contact us at the address below:
Rockwell Automation
Control and Information Group
Technical Communication, Dept. A602V
P.O. Box 2086
Milwaukee, WI 53201-2086 or visit our web site: http://www.rockwellautomation.com
Publication 1769-UM009B-EN-P - May 2002