advertisement
Rev 1.3
1.1
Features
1.1.1
Full Feature List
• DHCP
• Telnet
• SSHv2
• CLI
• FTP
• TFTP
• SCP
• Upload/download configuration
• Static MAC
• Syslog
• System alarms
• Auto temperature control
• Simple Network Time Protocol SNTP
• RADIUS
• TACACS+
• LDAP
• 802.1w RSTP
• 802.3x Flow Control
• 802.1Qab PFC
• 802.1Qaz - ETS
• Dual SW Image
• Familiar industry standard CLI
• Forward Error Correction (FEC) *
1.2
Serial Number and Product Version Information
The Serial number and the MAC for the switch are found on the pull out tab below the USB connector. The MAC for the Management PC is also on this tab. This MAC is for the mgmt0 management interface (the top Ethernet port). The second interface mgmt1 has the next consecutive
MAC.
Overview
12 Mellanox Technologies
SwitchX 36-Port QSFP 40Gb/s Ethernet System Hardware User Manual
Figure 2: Pull Out Tab
33
34 35 36
1 MGT 2 SX1035
CONSOLE
S /N : M T 1 1 1 7 X 0 0 0 1 4
P /N : M S X 1 0 3 5 B - 1 B F R
M A C : 0 0 0 2 C 9 0 2 0 0 4 0
M a d e i n I L
Pull out tab
R e v : A 1
Rev 1.3
Mellanox Technologies 13
advertisement
Related manuals
advertisement
Table of contents
- 5 List of Figures
- 7 List of Tables
- 8 Revision History
- 9 About this Manual
- 9 Intended Audience
- 9 Related Documentation
- 9 Conventions
- 10 Abreviations
- 10 Mellanox Part Numbering Legend
- 11 Overview
- 12 1.1 Features
- 12 1.1.1 Full Feature List
- 12 1.2 Serial Number and Product Version Information
- 14 40 Gb/s Ethernet
- 15 Basic Operation and Installation
- 15 3.1 Switch Platform Hardware Overview
- 15 3.1.1 Status LEDs
- 20 3.1.2 Reset Button
- 22 3.2 Air Flow
- 22 3.3 QSFP Cable Power Budget Classification
- 23 3.4 Interfaces
- 23 3.4.1 Port Connector Interfaces
- 23 3.4.2 Management and Firmware Updating Interfaces
- 24 3.5 Switch Platform Installation and Operation
- 25 3.5.1 Installation Safety Warnings
- 27 3.5.2 Mechanical Installation
- 28 3.6 Package Contents and Installation
- 28 3.6.1 Installing the Switch in the Rack
- 33 3.7 Grounding the Switch
- 33 3.8 Power Connections and Initial Power On
- 35 3.9 Extracting and Inserting the Power Supply Unit
- 36 3.10 Supported Approved Cables
- 36 3.11 Splitting the Data Stream Using Breakout (Fanout) Cables
- 39 3.12 Cable Installation
- 40 3.13 Extracting and Inserting the Fan Unit
- 41 3.14 Switch Shut Down Procedure
- 42 3.15 Disassembly of the Switch from the Rack
- 42 3.16 Disposal
- 42 3.17 Resetting the Switch
- 44 Management and Tools Overview
- 44 4.1 Chassis Management Using the MLNX-OS™ Software
- 44 4.2 Configuring the Switch for the First Time
- 45 4.2.1 Starting a Remote Connection to the Switch
- 45 4.2.2 Upgrading Software
- 46 Troubleshooting
- 49 Specification
- 51 Approved Cables
- 51 EMC Certifications
- 52 China CCC Warning Statement
- 54 Transferring the Power Cord
- 56 QSFP Interface
- 58 RJ-45 CONSOLE and Ethernet interfaces
- 59 Replacement Parts Ordering Numbers
- 60 Avertissements de sécurité d’installation (French)
- 64 Installation - Sicherheitshinweise (German)
- 68 Advertencias de seguridad para la instalación (Spanish)