advertisement
SwitchX 36-Port QSFP 40Gb/s Ethernet System Hardware User Manual
13. Do Not Use the Switch as a Shelf or Work Space
Caution: Slide/rail mounted equipment is not to be used as a shelf or a work space.
Rev 1.3
14. WEEE Directive
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic equipment (EEE) should be collected separately and not disposed of with regular household waste.
Dispose of this product and all of its parts in a responsible and environmentally friendly way.
3.5.2
Mechanical Installation
The switch platform can be rack mounted and is designed for installation in a standard 19” rack.
The power side of the switch includes a hot-swap power supply module, a blank cover for an optional second PS unit for redundancy, and a hot-swap fan tray. There are two possible air flow directions. Be sure that the switch air flow direction is compatible with your system, rack, and PS units. The connector side of the switch has the QSFP ports, system LEDs, and management connection ports.
The switch platform contains auto-sensing 100 - 240 VAC connections for all possible PS units.
The installer should use a rack capable of supporting the mechanical and environmental characteristics of a fully populated platform.
The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take precautions to guarantee proper ventilation in order to maintain good airflow at ambient temperature. Cable routing in particular should not impede the air exhaust from the chassis.
3.5.2.1 Installation Kits
There are two Installation kit options. One long and one short. Both the long and the short switches can be mounted using the long rail kit.
Table 9 - Installation Kit According to Rack Size
Kit OPN
MSX60-BKIT
MSX60-BKIT
MSX60-SKIT
Rack Size
40-60 cm
40-60 cm deep
60-80 cm deep
Mellanox Technologies 27
advertisement
