3.12 Cable Installation. Mellanox Technologies SwitchX

Add to My manuals
70 Pages

advertisement

3.12    Cable Installation. Mellanox Technologies SwitchX | Manualzz

SwitchX 36-Port QSFP 40Gb/s Ethernet System Hardware User Manual

1 3 5

Figure 29: 3 Examples of Port Mapping Assignment

7 9 11 13 15

64 X10 GbE

17 19 21 23 25 27 29 31 33 35

2 4 6

DO NOT USE

THESE PORTS

8 10 12 14 16 18 20 22 24 26 28

12 x 40GbE ports blocked = 00 10GbE ports

12 x 40GbE ports split to 4 10GbE ports = 48 10GbE ports

4 x 40GbE ports split to 2 10GbE ports = 8 10GbE ports

8 x 40GbE ports used as 10GbE ports = 8 10GbE ports

Total = 64 x 10GbE ports

30 32 34 36

1 3 5 7 9 11

56 x 10GbE and 8 x 40GbE

13 15 17 19 21 23 25 27 29 31 33 35

2 4 6

DO NOT USE

THESE PORTS

8 10 12 14 16 18 20 22 24 26 28 30 32 34

12 x 40GbE ports blocked = 00 10GbE ports + 00 40GbE ports

12 x 40GbE ports split to 4 10GbE ports = 48 10GbE ports

4 x 40GbE ports split to 2 10GbE ports = 8 10GbE ports

8 x 40GbE ports used as 40GbE ports = 8 x 40GbE ports

Total = 56 x 10GbE and 8 x 40GbE ports

36

1 3 5 7 9 11

48 x 10GbE and 12 x 40GbE

13 15 17 19 21 23 25 27 29 31 33 35

2 4 6

DO NOT USE

THESE PORTS

8 10 12 14 16 18 20 22 24 26 28 30 32 34

12 x 40GbE ports blocked = 00 10GbE ports + 00 40GbE ports

12 x 40GbE ports split to 4 10GbE ports = 48 10GbE ports

12 x 40GbE ports used as 40GbE ports = 12 40GbE ports

Total = 48 x 10GbE and 12 x 40GbE

36

Rev 1.3

3.12

Cable Installation

All cables can be inserted or removed with the unit powered on. To insert a cable, press the connector into the port receptacle until the connector is firmly seated. The LED indicator, corresponding to each data port, will light when the physical connection is established (that is, when the unit is powered on and a cable is plugged into the port with the other end of the connector plugged into a functioning port). After plugging in a cable, lock the connector using the latching mechanism particular to the cable vendor. When a logical connection is made the LED will change to green. When data is being transferred the light will blink green.

Do not force the cable into the cage with more than

40 newtons / 9.0 pounds force / 4 kg force. Greater insertion force may cause damage to the cable or the cage.

Mellanox Technologies 39

advertisement

Related manuals

Download PDF

advertisement

Table of contents