advertisement
Rev 1.3
A.3
China CCC Warning Statement
52 Mellanox Technologies
SwitchX 36-Port QSFP 40Gb/s Ethernet System Hardware User Manual Rev 1.3
Appendix B: Thermal Threshold Definitions
There are three thermal threshold definitions for the SwitchX® switch device which impact the overall switch system operation state: Warning, Critical and Emergency.
1. Warning – 100C
On managed systems only: When the SwitchX® device crosses the 100C threshold, a Warning
Threshold message will be issued by the MLNX-OS management SW, indicating to system administration that the switch has crossed the Warning threshold.
Note that this temperature threshold does not require nor lead to any action by hardware (such as switch shutdown).
2. Critical – 120C
When the SwitchX® device crosses this temperature, the firmware will automatically shut down the device.
3. Emergency – 130C
In case the firmware fails to shut down the SwitchX® device upon crossing the Critical threshold, the SwitchX® device will auto-shutdown upon crossing the Emergency (130C) threshold.
Mellanox Technologies 53
advertisement
Related manuals
advertisement
Table of contents
- 5 List of Figures
- 7 List of Tables
- 8 Revision History
- 9 About this Manual
- 9 Intended Audience
- 9 Related Documentation
- 9 Conventions
- 10 Abreviations
- 10 Mellanox Part Numbering Legend
- 11 Overview
- 12 1.1 Features
- 12 1.1.1 Full Feature List
- 12 1.2 Serial Number and Product Version Information
- 14 40 Gb/s Ethernet
- 15 Basic Operation and Installation
- 15 3.1 Switch Platform Hardware Overview
- 15 3.1.1 Status LEDs
- 20 3.1.2 Reset Button
- 22 3.2 Air Flow
- 22 3.3 QSFP Cable Power Budget Classification
- 23 3.4 Interfaces
- 23 3.4.1 Port Connector Interfaces
- 23 3.4.2 Management and Firmware Updating Interfaces
- 24 3.5 Switch Platform Installation and Operation
- 25 3.5.1 Installation Safety Warnings
- 27 3.5.2 Mechanical Installation
- 28 3.6 Package Contents and Installation
- 28 3.6.1 Installing the Switch in the Rack
- 33 3.7 Grounding the Switch
- 33 3.8 Power Connections and Initial Power On
- 35 3.9 Extracting and Inserting the Power Supply Unit
- 36 3.10 Supported Approved Cables
- 36 3.11 Splitting the Data Stream Using Breakout (Fanout) Cables
- 39 3.12 Cable Installation
- 40 3.13 Extracting and Inserting the Fan Unit
- 41 3.14 Switch Shut Down Procedure
- 42 3.15 Disassembly of the Switch from the Rack
- 42 3.16 Disposal
- 42 3.17 Resetting the Switch
- 44 Management and Tools Overview
- 44 4.1 Chassis Management Using the MLNX-OS™ Software
- 44 4.2 Configuring the Switch for the First Time
- 45 4.2.1 Starting a Remote Connection to the Switch
- 45 4.2.2 Upgrading Software
- 46 Troubleshooting
- 49 Specification
- 51 Approved Cables
- 51 EMC Certifications
- 52 China CCC Warning Statement
- 54 Transferring the Power Cord
- 56 QSFP Interface
- 58 RJ-45 CONSOLE and Ethernet interfaces
- 59 Replacement Parts Ordering Numbers
- 60 Avertissements de sécurité d’installation (French)
- 64 Installation - Sicherheitshinweise (German)
- 68 Advertencias de seguridad para la instalación (Spanish)