advertisement
▼
Scroll to page 2
of
70
Rev 1.3
Appendix E: RJ-45 CONSOLE and Ethernet interfaces
The RJ-45 CONSOLE and Ethernet interfaces uses the EIA 568A standard wiring color coding.
CONSOLE
J34
TXD+
TXD-
RXD+
GND
GND
RXD-
GND
GND
Looking into the Socket
RJ45_RTS#
RJ45_DTR#
RJ45_TXD
GND
GND
RJ45_RXD
GND
GND
Pin 1
Pin 8
Table 13 - RJ-45 Pinout
Connection
TXD+
TXD-
RXD+
GND
GND
RXD-
GND
GND
Signal Pin#
RJ-45_RTS# 1
RJ-45_DTR# 2
RJ-45_TXD 3
GND 4
GND 5
RJ-45_RXD 6
GND
GND
7
8
Color
G/W
G
O/W
Bl
Bl/W
O
Br/W
Br
I
2
C
J34
TXD+
TXD-
RXD+
GND
GND
RXD-
GND
GND
RJ45_SDA
GND
GND
GND
GND
RJ45_SCL
GND
GND
Pin 1
Pin 8
Looking into the Socket
58 Mellanox Technologies
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 5 List of Figures
- 7 List of Tables
- 8 Revision History
- 9 About this Manual
- 9 Intended Audience
- 9 Related Documentation
- 9 Conventions
- 10 Abreviations
- 10 Mellanox Part Numbering Legend
- 11 Overview
- 12 1.1 Features
- 12 1.1.1 Full Feature List
- 12 1.2 Serial Number and Product Version Information
- 14 40 Gb/s Ethernet
- 15 Basic Operation and Installation
- 15 3.1 Switch Platform Hardware Overview
- 15 3.1.1 Status LEDs
- 20 3.1.2 Reset Button
- 22 3.2 Air Flow
- 22 3.3 QSFP Cable Power Budget Classification
- 23 3.4 Interfaces
- 23 3.4.1 Port Connector Interfaces
- 23 3.4.2 Management and Firmware Updating Interfaces
- 24 3.5 Switch Platform Installation and Operation
- 25 3.5.1 Installation Safety Warnings
- 27 3.5.2 Mechanical Installation
- 28 3.6 Package Contents and Installation
- 28 3.6.1 Installing the Switch in the Rack
- 33 3.7 Grounding the Switch
- 33 3.8 Power Connections and Initial Power On
- 35 3.9 Extracting and Inserting the Power Supply Unit
- 36 3.10 Supported Approved Cables
- 36 3.11 Splitting the Data Stream Using Breakout (Fanout) Cables
- 39 3.12 Cable Installation
- 40 3.13 Extracting and Inserting the Fan Unit
- 41 3.14 Switch Shut Down Procedure
- 42 3.15 Disassembly of the Switch from the Rack
- 42 3.16 Disposal
- 42 3.17 Resetting the Switch
- 44 Management and Tools Overview
- 44 4.1 Chassis Management Using the MLNX-OS™ Software
- 44 4.2 Configuring the Switch for the First Time
- 45 4.2.1 Starting a Remote Connection to the Switch
- 45 4.2.2 Upgrading Software
- 46 Troubleshooting
- 49 Specification
- 51 Approved Cables
- 51 EMC Certifications
- 52 China CCC Warning Statement
- 54 Transferring the Power Cord
- 56 QSFP Interface
- 58 RJ-45 CONSOLE and Ethernet interfaces
- 59 Replacement Parts Ordering Numbers
- 60 Avertissements de sécurité d’installation (French)
- 64 Installation - Sicherheitshinweise (German)
- 68 Advertencias de seguridad para la instalación (Spanish)