CONNECTION. Yamaha BD A 1060, BD-S681 S, BD-S671, BD-A1060 S, BDS 681
CONNECTION
INTRODUCTION TO CONNECTIONS
Find the corresponding connection method on your video/audio equipment. We recommend that you use the HDMI terminal which provides high quality digital audio and video on a single connection. If you use the other terminals/jacks, connect the video first. Then connect the audio.
Connect video and audio to AV receiver with HDMI cable.
HDMI terminal on
AV receiver?
*
HDMI terminal on TV?
Refer to owner’s manual of AV receiver.
START
Use AV receiver?
HDMI terminal on TV?
Connect video to TV with HDMI cable.
Connect video to AV receiver.
HDMI terminal on TV?
Connect video and audio to TV with HDMI cable.
Connect video to TV.
Yes
No
■
Rear panel
0 9
* When you connect to an AV receiver that cannot output the sound, input via its HDMI terminal, refer to the owner’s manual of your AV receiver.
DIGITAL OUT
COAXIAL
NETWORK HDMI
VIDEO OUT
COMPONENT
P
B
Y
AUDIO OUT
L
OPTICAL
USB
P
R
VIDEO
R
1 2 3 4 5 6
OUT IN
REMOTE CONTROL
7 8
10
En
Video connection to TV
A’
to AV receiver
B
or
C
Video connection to TV
B’
or
C’
Connect audio to AV receiver.
Video and audio connection to
AV receiver
A
Audio connection to AV receiver
D
or
E
or
F
Connect audio to TV.
Video and audio connection to TV
A’
Audio connection to TV
D’
or
E’
or
F’
2
1
2
3
4
5
6
7
REMOTE CONTROL (OUT/IN) (p. 17)
8
9
0
11
En
HDMI CONNECTION
■
Connecting to the HDMI terminal
– You can enjoy high quality digital picture and sound through the HDMI terminal.
– Firmly connect an HDMI cable (commercially available) to the HDMI terminals.
– See page 35 for information on the audio/video output formats.
– Use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the back cover).
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
DIGITAL OUT
COAXIAL
NETWORK HDMI
VIDEO OUT
COMPONENT
P
B
Y
AUDIO OUT
L
OPTICAL
USB
P
R
VIDEO
R
To HDMI terminal
HDMI cable
(commercially available)
A A’
Hints
– When you use the HDMI Control function,
refer to the “HDMI Control” (p. 30).
– For information on the output mode of HDMI
terminal, refer to the “HDMI” (p. 34).
– When no picture is displayed, refer to
■
Connection for the playback of Blu-ray 3D discs
To enjoy Blu-ray 3D discs on this Player, you need the following equipments and connections:
– You need a TV and an AV Receiver (if you need) that have 3D functionality.
– All the components must be connected with
HDMI cables.
– Blu-ray disc should contain 3D images.
AV receiver
To HDMI input terminal
HDMI IN
TV
12
En
VIDEO CONNECTIONS
■
Connecting to the component/video jack
– You can enjoy accurate color reproduction and high quality images through the component jacks.
– Firmly connect a component video cable (commercially available) or a video pin cable to the COMPONENT jacks/
VIDEO jack.
– See page 36 for information on the video output formats.
2
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player This Player
DIGITAL OUT
COAXIAL
NETWORK HDMI
VIDEO OUT
COMPONENT
Y
AUDIO OUT
L
OPTICAL
USB
P
R
VIDEO
R
DIGITAL OUT
COAXIAL
NETWORK HDMI
VIDEO OUT
COMPONENT
Y
AUDIO OUT
L
OPTICAL
USB
P
R
VIDEO
R
To COMPONENT jacks
(Yellow)
To VIDEO jack
B
Component video cable
(commercially available)
B’
To component input jacks
C
Audio/Video cable
(supplied)
To video input jack
C’
COMPONENT IN
P
R
(Red)
P
B
(Blue)
(Green)
Y
(Yellow)
VIDEO
AV INPUT
AV receiver
TV
AV receiver TV
Notes
– If you play back the image via VCR, the image may deteriorate due to the copy guard function.
– To enjoy BD-3D discs on this Player, you need to connect an AV receiver, a TV, and this Player using HDMI cables. Refer to the previous page.
13
En
AUDIO CONNECTIONS
■
Connecting to the digital audio jack/terminal
– You can connect audio equipment or the TV to the COAXIAL jack/OPTICAL terminal.
– Firmly connect a Coaxial digital audio cable (commercially available) or optical cable (commercially available) to the coaxial digital audio jack or optical digital audio terminal.
– See page 35 for information on the audio output formats.
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
This Player
DIGITAL OUT
COAXIAL
NETWORK HDMI
VIDEO OUT
COMPONENT
P
B
Y
AUDIO OUT
L
DIGITAL OUT
COAXIAL
NETWORK HDMI
VIDEO OUT
P
B
COMPONENT
Y
AUDIO OUT
L
OPTICAL
USB
P
R
VIDEO
R
OPTICAL
USB
P
R
VIDEO
R
To COAXIAL jack
To OPTICAL terminal
D
To coaxial input jack
Coaxial digital audio cable
(commercially available)
E
Optical cable
(commercially available)
E’
To optical input terminal
COAXIAL
AV INPUT
OPTICAL
DIGITAL AUDIO IN
AV receiver TV AV receiver TV
Hint
14
En
AUDIO CONNECTIONS
■
Connecting to the audio jacks
– You can connect audio equipment or the TV to the AUDIO OUT L/R jacks.
– Firmly connect an Audio/Video cable (supplied) to the AUDIO OUT L/R jack.
– See page 35 for information on the audio output formats.
Caution!
Do not connect the power cable of this Player until all connections are completed.
2
This Player
DIGITAL OUT
COAXIAL
NETWORK HDMI
VIDEO OUT
COMPONENT
P
B
Y
AUDIO OUT
L
OPTICAL
USB
P
R
VIDEO R
To AUDIO OUT
L/R jack
F
Audio/Video cable
(supplied)
To audio L/R input jack
(White) (Red)
AUDIO
L R
AUDIO IN
F’
AV receiver TV
15
En
NETWORK AND USB CONNECTION
■
Connecting to the NETWORK terminal and USB port
– PC contents can be played back by connecting this Player to the network.
– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live
compatible discs. Refer to page 26 regarding further information on BD-Live functions.
– You can connect a USB memory device (2 GB or greater and formatted with FAT 32/16) for BD Local Storage to the USB port on the rear panel (or front panel) of the player to save the BD-Live data or to upgrade the software of this Player.
– Firmly connect a network cable (commercially available) and a USB memory device (commercially available) to the NETWORK terminal and USB port.
– Use only an STP (shielded twisted pair) network cable.
– When using the internet, a broadband internet connection as shown below is required.
– Connect the other connector of the network cable to the hub/broadband router.
Before using the USB memory device
CAUTION:
– Do not remove the USB memory device or unplug the power cable while the
operations for BD-Live (p. 26) or
software upgrade are being performed.
– Do not use a USB extension cable when connecting a USB memory device to the
USB port of the Player. Using a USB extension cable may prevent the Player from performing correctly.
DI G ITAL OUT
COAXIAL
NETWORK HDMI
OPTICAL
USB
This Player
VIDEO OUT
P
B
COMPONENT
Y
AUDIO OUT
L
P
R
VIDEO
R
Note
– Yamaha cannot guarantee that all brands’
USB memory devices will operate with this Player.
To USB
Terminal
To NETWORK terminal
Notes
– When using a broadband internet connection, a contract with an internet service provider is required. For more details, contact your nearest internet service provider.
– Refer to the operation manual of the equipment you have as the connected equipment and connection method may differ depending on your internet environment.
– Use a network cable/router supporting
10BASE-T/100BASE-TX.
USB memory device
(commercially available)
Hint
– To save BD-Live data on the USB memory device on the front panel, set
Local Storage to Front
Network cable
(commercially available)
To LAN terminal
LAN
Internet
Modem
Hub or broadband router
After connecting
– When you set the Network setting manually, refer to “Network” (p. 32).
– To play back the PC contents on your network, refer to “Using network content” (p. 21).
PC
16
En
OTHER CONNECTIONS
■
Connecting to the REMOTE
CONTROL jacks
– You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL
(OUT/IN) jacks.
– Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks.
– If your AV receiver is a Yamaha product and has the capability to transmit SCENE control signals, you can control the Player with the SCENE function.
Hints
– For details about the SCENE function, refer to the owner’s manual supplied with your Yamaha AV receiver.
– You can connect a Yamaha component (such as CD player) supports the SCENE function to the
REMOTE CONTROL (OUT) jack of this Player.
■
Connecting the power cable
– After all connections are completed, plug the supplied power cable into the AC IN on the rear of the Player. Then plug into AC outlet.
2
Caution!
Do not connect the power cable of this
Player until all connections are completed.
This Player
AUDIO OUT
L
OUT IN
REMOTE CONTROL
EO
R
To REMOTE
CONTROL
(OUT) jack
Monaural 3.5 mm mini plug cable
(commercially available)
To REMOTE
CONTROL (IN) jack
Monaural 3.5 mm mini plug cable
(commercially available)
To remote control in jack
REMOTE CONTROL IN REMOTE CONTROL OUT
To remote control out jack
To AC inlet
To AC outlet
Note
– TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH THE UN-INSULATED PARTS OF
ANY CABLES WHILE THE POWER CABLE IS
CONNECTED.
Yamaha component
Infrared signal receiver or Yamaha component
(such as AV receiver)
17
En
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project