Introduction. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Introduction. Exmark QUEST QZS708GEM50200 | Manualzz

Introduction

CONGRATULATIONS on the purchase of your

Exmark Mower. This product has been carefully designed and manufactured to give you a maximum amount of dependability and years of trouble-free operation.

This manual contains operating, maintenance, adjustment, and safety instructions for your Exmark mower.

BEFORE OPERATING YOUR MOWER,

CAREFULLY READ THIS MANUAL IN ITS

ENTIRETY.

By following the operating, maintenance, and safety instructions, you will prolong the life of your mower, maintain its maximum efficiency, and promote safe operation.

Important: To maximize safety, performance, and proper operation of this machine, it is essential that all operators carefully read and fully understand the contents of the Operator’s manual provided with the product. Safe operation of Exmark equipment is essential.

Failure to comply with the operating instructions or receive proper training may result in injury.

Go to http://www.Exmark.com for additional safe operation information, such as safety tips, training materials, and Operator’s manuals.

If additional information is needed, or should you require trained mechanic service, contact your authorized Exmark equipment dealer or distributor.

All Exmark equipment dealers and distributors are kept informed of the latest methods of servicing and are equipped to provide prompt and efficient service in the field or at their service stations. They carry ample stock of service parts or can secure them promptly for you from the factory.

All Exmark parts are thoroughly tested and inspected before leaving the factory, however, attention is required on your part if you are to obtain the fullest measure of satisfaction and performance.

Whenever you need service, genuine Exmark parts, or additional information, contact an Authorized

Service Dealer or Exmark Customer Service and have the model and serial numbers of your product ready.

Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided.

Figure 1

1.

Model and serial number location

Model No.

Serial No.

For complete warranty details, see http://www.Exmark.com. You may also call us 402-223-6375 to request a written copy of the product’s warranty.

g236603

3

Contents

Introduction ........................................................... 3

Safety ..................................................................... 5

Safety Alert Symbol ......................................... 5

Safe Operating Practices .................................. 5

Safety and Instructional Decals ....................... 9

Specifications ........................................................15

Systems ..........................................................15

Dimensions....................................................17

Torque Requirements .....................................17

Product Overview .................................................18

Operation ..............................................................18

Controls .........................................................18

Operating Instructions ...................................20

Think Safety First ...........................................20

Recommended Gasoline.................................20

Checking the Engine Oil Level........................22

Starting the Engine .........................................22

Operating the Blades ......................................23

Stopping the Engine .......................................23

The Safety Interlock System............................24

Check Safety Interlock System ........................24

Driving Forward or Backward.........................27

Stopping the Machine.....................................28

Adjusting the Height of Cut ............................28

Adjusting the Anti-Scalp Rollers......................28

Positioning the Seat ........................................29

Changing the Seat Ride Suspension .................30

Adjusting the Motion Control Levers ..............30

Pushing the Machine by Hand.........................31

Side Discharge................................................31

Transporting the Machine...............................32

Loading the Machine ......................................32

Operating Tips ..............................................33

Maintenance ..........................................................35

Recommended Maintenance Schedule(s) ............36

Pre-Maintenance Procedures .............................37

Raising the Seat ..............................................37

Periodic Maintenance ........................................37

Lubrication.....................................................37

Engine Maintenance.......................................37

Servicing the Engine Oil .................................41

Servicing the Spark Plug-Exmark 452cc

Engine .......................................................46

Servicing the Spark Plug-Exmark 708cc

Engine .......................................................47

Cleaning the Blower Housing..........................48

Fuel System Maintenance ...............................49

Servicing the Emissions Filter .........................49

Electrical System Maintenance........................49

Charging the Battery.......................................50

Drive System Maintenance .............................53

Checking the Tire Pressure .............................53

Changing the Hydraulic System Filter and Oil––50 and 60 Inch S-Series

Only...........................................................53

Mower Maintenance .......................................55

Servicing the Cutting Blades ...........................55

Leveling the Mower Deck ...............................58

Mower Belt Maintenance ................................61

Replacing the Discharge Deflector ..................63

Cleaning ............................................................65

Clean Grass Build-Up Under Deck .................65

Clean Engine and Exhaust System

Area ...........................................................65

Clean Debris From Machine ...........................65

Storage ..................................................................66

Cleaning and Storage ......................................66

Troubleshooting ....................................................67

Schematics ............................................................69

4

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents