Safety and Instructional Decals. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Safety and Instructional Decals. Exmark QUEST QZS708GEM50200 | Manualzz

Safety

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or lost.

decal93-7009

93-7009

1.

Warning—don't operate the mower with the deflector up or removed; keep the deflector in place.

2.

Cutting/dismemberment hazard of hand or foot, mower blade—stay away from moving parts.

decal105-7015

105-7015

For Models with 34 Inch or 42 Inch Mower Decks

1.

Belt routing decal99-3943

99-3943

For Models with 50 Inch or 60 Inch Mower Decks

1.

Engine decal106-8717

106-8717

For Models with 34 Inch or 42 Inch Mower Decks

1.

Read the instructions before servicing or performing maintenance.

2.

Check tire pressure every 25 operating hours.

3.

Grease every 25 operating hours.

4.

Engine

9

Safety

1.

Parking brake—disengaged decal115-9625

115-9625

2.

Parking brake—engaged

117–2718 decal117-2718

119-8871

For Models with 34 Inch or 42 Inch Models decal119-8871-1

1.

Height-of-cut decal119-8870

119-8870

For Models with 50 Inch or 60 Inch Mower Decks

1.

Height of cut decal121-2989

121-2989

1.

Bypass lever position for pushing the machine

2.

Bypass lever position for operating the machine

10

Safety decal130-0765

1.

Read the Operator's

Manual .

130-0765

3.

Remove the key from the ignition and read the

Operator's Manual before performing maintenance.

2.

Height-of-cut selection decal132-0872

132-0872

1.

Thrown object hazard—keep bystanders away from the machine.

2.

Thrown object hazard, raised baffle—do not operate the machine with an open deck; use a bagger or a baffle.

3.

Severing hazard of hand or foot—keep away from moving parts.

4.

Entanglement hazard—keep away from moving parts; keep all guards and shields in place.

1.

Oil drain

131-1097

Exmark 708cc Engine Only decal131-1097

1.

Machine speed

2.

Fast

3.

Slow

135-2310

4.

Neutral

5.

Reverse decal135-2310

11

Safety

136-5596

For Models with 50 Inch or 60 inch Decks decal136-5596

1.

Check the tire pressure every 25 operating hours.

2.

Engine oil

4.

Check the tire pressure every 25 operating hours.

5.

Read the Operator's

Manual before performing maintenance.

3.

Check the tire pressure every 25 operating hours.

PTO Switch Symbols

1.

PTO–disengage 2.

PTO–engage decalptosymbols

135-2468

42 Inch Models with Exmark 452cc Engine decal135-2468

1.

Choke

2.

Fast

3.

Slow

4.

Optional hour meter accessory

Exmark 708cc Engine Only

1.

Shut down engine at full throttle decal132-0904

12

Safety decal135-2469

135-2469

34 or 42 Inch Models with Exmark 708cc Engine

1.

Fast

2.

Slow

4.

Choke–Off

5.

Optional hour meter accessory

3.

Choke–On decal135-2470

135-2470

50 or 60 Inch Models with Exmark 708cc Engine

1.

Fast

2.

Slow

3.

Choke–On

4.

Choke–Off decal135-3295

135-3295

This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum recommended slope indicated on the decal. It is important that each operator review the slope operation instructions in the operator’s manual and review the conditions in which the machine is being operated to determine if the machine may be operated in the conditions that day and on that site. Changes to terrain can result in a change in slope operation for any machine.

1.

2.

Cutting hazard. Pinch hazard—Keep hands and feet away from moving parts. Keep all guards and shields in place.

3.

Warning—Read the Operator's Manual.

Thrown object hazard—Keep bystanders a safe distance from the machine, pick up debris before operating, and keep the deflector shield down.

4.

Bodily harm hazard—Do Not carry passengers; look behind you when mowing in reverse.

5.

Ramp hazard—When loading onto a trailer, Do Not use dual ramps. Only use a singular ramp wide enough for the machine. Back up the ramp (in reverse) and drive forward off the ramp.

6.

Tipping hazard—Do Not use on slopes near open water.

Do Not use on slopes greater than 15°.

13

Safety decalbatterysymbols

Battery Symbols

Some or all of these symbols are on your battery.

1.

Explosion hazard 5.

Read the Operator's Manual.

2.

No fire, open flames, or smoking

3.

Caustic liquid/chemical burn hazard 7.

Wear eye protection; explosive gases can cause blindness and other injuries.

4.

Wear eye protection

6.

Keep bystanders a safe distance from the battery.

8.

Battery acid can cause blindness or severe burns.

9.

Flush eyes immediately with water and get medical help fast.

10.

Contains lead; do not discard.

14

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents