Checking the Engine Oil Level. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Checking the Engine Oil Level. Exmark QUEST QZS708GEM50200 | Manualzz

Operation correct amount of gas stabilizer/conditioner to the gas.

Note: A fuel stabilizer/conditioner is most effective when mixed with fresh gasoline. To minimize the chance of varnish deposits in the fuel system, use fuel stabilizer at all times.

Filling the Fuel Tank

the neck of the tank. This space at the base of the filler neck allows gasoline to expand. Do Not fill the fuel tank completely full. Overfilling may result in fuel leakage or damage to the engine or emissions system.

4.

Install the fuel tank cap securely and tighten until it “clicks”. Wipe up any gasoline that may have spilled.

Make sure the engine is shut off, motion controls are in neutral lock position, and parking brake is engaged.

Tank maximum capacity is 3 gallons (11 L).

Note: Use the fuel window to verify the presence of gasoline before filling the tank.

Important: Do Not overfill fuel tank. Fill the fuel tank to the bottom of the filler neck. The empty space in the tank allows the fuel to expand.

Overfilling may result in fuel leakage or damage to the engine or emission system.

1.

Shut the engine off, move the motion controls outward to the neutral lock position, and engage parking brake.

2.

Clean around the fuel tank cap and remove the cap.

Checking the Engine Oil

Level

Before you start the engine and use the machine, check the oil level in the engine crankcase; refer to

Checking the Oil Level in Engine Maintenance section.

Starting the Engine

1.

Sit down on the seat and move the motion controls out to the neutral lock position.

2.

Pull up and back on the parking brake lever to engage the parking brake.

3.

Disengage the blades by pushing down the blade control switch to “OFF”.

Figure 9

3.

Add unleaded regular gasoline until the fuel g237149

1.

Ignition

2.

Off

3.

Run

4.

Start reaches the base of the filler neck and does not fill

22 g237160

Figure 10

5.

Blade control switch–Off position

6.

Choke control

7.

Throttle lever

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents