Operating the Blades. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Operating the Blades. Exmark QUEST QZS708GEM50200 | Manualzz

Operation

4.

Engage the choke before starting a cold engine

(if applicable).

Note: A warm or hot engine may not require choking.

5.

Turn the ignition key to “START” to energize the starter. When the engine starts, release the key.

Important: Do Not engage the starter for more than 5 seconds at a time. If the engine fails to start, allow a 60 second cool-down period between attempts. Failure to follow these instructions can burn out the starter motor.

6.

Once the engine starts, gradually push down the choke control (if applicable) as the engine warms.

If the engine stalls or hesitates, slightly pull the control up for a few seconds.

Figure 11

1.

Throttle–Midway position 2.

Blade control switch—On position g237182

Operating the Blades

The blade control switch, represented by a power take-off (PTO) symbol, engages and disengages power to the mower blades. This switch controls power to any attachments that draw power from the engine, including the mower deck and cutting blades.

5.

Move throttle to full forward position before mowing.

Disengaging the Blades

Set the throttle to the midway position. Push the blade control switch to “OFF” to disengage the blades.

Engaging the Blades

1.

Disengage the parking brake.

2.

Place the motion control levers in neutral.

3.

Move the throttle midway between the “SLOW” and “FAST” positions.

Note: Always engage the blades with the throttle in the midway position.

4.

Pull out on the blade control switch, to the “ON” position, to engage the blades.

Stopping the Engine

1.

Bring the unit to a full stop.

2.

Disengage the blades.

3.

Disengage the parking brake.

4.

Place the motion control levers in neutral.

5.

Adjust the throttle.

• For All Engines except Exmark: Place the throttle midway between the “SLOW” and

“FAST” positions.

• For Exmark Engines: Place the throttle in the

“FAST” position.

6.

Allow the engine to run for a minimum of 15 seconds, then turn the ignition switch to the

“OFF” position to stop the engine.

7.

Remove the key to prevent children or other unauthorized persons from starting engine.

23

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents