Stopping the Machine. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Stopping the Machine. Exmark QUEST QZS708GEM50200 | Manualzz

Operation

CAUTION

Children or bystanders may be injured if they move or attempt to operate the mower while it is unattended.

Always move the motion control levers to the neutral lock position, disengage the blade control switch, engage the parking brake, and remove the key when leaving the machine unattended, even if just for a few minutes.

Figure 14

To go straight, apply equal pressure to both motion control levers ( and Figure 14).

To turn, release the pressure on the motion control lever toward the direction you want to turn ( and Figure 14).

To stop, push the motion control levers to neutral.

g008953

Adjusting the Height of Cut

1.

Raise the deck to the transport position (4.5 inch

(114 mm) cut height) by moving the deck height adjustment lever inward and pulling up. The height can also be adjusted by moving the deck height adjustment lever inward and pushing the height-of-cut foot lever forward (Figure 15). The transport lever will automatically engage and will drop into place.

Stopping the Machine

To stop the machine:

1.

Move the motion control levers to the neutral lock position, disengage the blade control switch, and engage the parking brake.

2.

Adjust the throttle:

• For All Engines except Exmark: Place the throttle midway between the “SLOW” and

“FAST” positions.

• For Exmark Engines: Place the throttle in the

“FAST” position.

3.

Allow the engine to run for a minimum of 15 seconds, then turn the ignition switch to the

“OFF” position. Remember to remove the key from the ignition switch.

g237189

Figure 15

1.

Height-of-cut foot lever

2.

Deck height adjustment lever

3.

Height-of-cut positions

4.

Transport position – 4.5

inch (115 mm)

2.

Push the foot lever forward, pull the deck height adjustment lever handle inward and let the deck lower down to the desired cut height by slowly decreasing foot pressure allowing the foot lever to travel rearward. Move the deck height adjustment lever outward at the desired height-of-cut.

Adjusting the Anti-Scalp

Rollers

It is recommended to change the anti-scalp roller position when the height of cut has changed.

28

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents