Positioning the Seat. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Positioning the Seat. Exmark QUEST QZS708GEM50200 | Manualzz

Operation

1.

Stop the machine and move the motion control levers outward to the neutral locked position.

2.

Disengage the PTO.

3.

Engage the park brake.

4.

Stop the engine, remove the key and wait for all moving parts to stop.

5.

After adjusting the height of cut, adjust the anti-scalp rollers by removing the nyloc nut.

6.

Adjust the anti-scalp rollers for the normal operating conditions. Place rollers in one of the positions shown in Figure 17. Rollers will maintain 3/4 inches (19 mm) clearance to the ground to minimize gouging and roller wear or damage.

g015168

Figure 17

All except 42 Inch E-Series Deck

For cutting heights above 3 1/2 inches (90 mm) use the bottom hole. The rollers will still be effective against scalping.

1.

Anti-scalp roller mounting bracket

2.

Cutting height

Note: For Maximum Deck Flotation, place the rollers one hole position lower. Rollers should maintain 1/4 inch (6.35 mm) clearance to the ground. Do Not adjust rollers to support the deck.

7.

Torque hardware to 27-33 ft-lb (37-45 N-m) or loss of roller may result.

Positioning the Seat

Figure 16

42 Inch E-Series Deck g015167

The seat can move forward and backward. Position the seat where you have the best control of the machine and are most comfortable.

• E-Series Units:

1.

Tip the seat forward.

2.

Loosen the adjustment bolts.

1.

Anti-scalp roller mounting bracket

2.

Below 2 1/2 inches (64mm) cutting height

3.

2 1/2 inches (64mm) and above cutting height

29

1.

Adjustment bolt

Figure 18 g237245

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents