Changing the Seat Ride Suspension. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Changing the Seat Ride Suspension. Exmark QUEST QZS708GEM50200 | Manualzz

Operation

3.

Move the seat to the desired position and tighten bolts.

4.

Tip the seat back to the closed position.

• S-Series Units:

1.

Push the adjustment lever towards the center of the machine to release the seat adjuster track (Figure 19).

1.

Bolt

2.

Spring

Figure 20

3.

Nut

4.

Additional mounting holes g237291

Figure 19 g237277

Up to five springs can be secured to the seat box with a nut and bolt, see Figure 20.

Refer to your Parts Manual for spring and hardware part numbers.

1.

Adjustment lever

2.

Move the seat to the desired position and release the lever to lock in that position.

Adjusting the Motion Control

Levers

Changing the Seat Ride

Suspension

The number of seat springs can be changed to maximize rider comfort. More springs should be used with heavier operators and on rough terrain. Fewer springs should be used with lighter operators and when mowing smooth, well established lawns. Always keep the number of springs on the left and right side the same when adding and removing springs.

Adjusting the Height

The motion control levers can be adjusted higher or lower for maximum operator comfort.

1.

Remove the hardware holding the control lever to the control arm shaft (Figure 21).

30

1.

Control arm shaft

2.

Control lever

Figure 21

3.

Washer

4.

Bolt g237376

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents