Recommended Maintenance Schedule(s). Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Recommended Maintenance Schedule(s). Exmark QUEST QZS708GEM50200 | Manualzz

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service

Interval

After the first 5 hours

After the first 75 hours

Before each use or daily

Every 25 hours

Every 50 hours

Every 100 hours

Every 200 hours

Every 500 hours

Before storage

Monthly

Yearly

Maintenance Procedure

• Change the engine oil (Exmark 452cc Engine).

• Change the engine oil (Exmark 708cc Engine).

• Change the hydraulic filter and fluid (50 and 60 inch S-Series only).

• Check the safety interlock system.

• Check the safety interlock system.

• Check and clean the air cleaner foam element (more often under extremely dusty, dirty conditions)(Exmark 452cc engine).

• Check the engine oil (Exmark 452cc Engine).

• Check the engine oil (Exmark 708cc Engine).

• Check the mower blades.

• Clean the grass build-up from under the cutting deck.

• Clean the engine and exhaust system area.

• Clean the grass and debris build-up from the machine and cutting deck.

• Grease all lubrication points.

• Clean the air cleaner foam element (more often in dusty, dirty conditions)(Exmark 708cc engine).

• Check the tire pressure.

• Check the belts.

• Replace the air cleaner paper element (more often under extremely dusty, dirty conditions)(Exmark 452cc engine).

• Check the spark plug (Exmark 452cc engine).

• Service the air cleaner paper element (more often in dusty, dirty conditions)(Exmark

708cc engine).

• Replace the air cleaner foam element (more often in dusty, dirty conditions)(Exmark

708cc engine).

• Change the engine oil (change it more often under a heavy load or in high temperatures)

(Exmark 452cc Engine).

• Change the engine oil (change it more often under a heavy load or in high temperatures)(Exmark 708cc Engine).

• Replace the spark plug (Exmark 452cc engine).

• Check the spark plug (Exmark 708cc engine).

• Clean the blower housing. More often under dirty conditions.

• Replace the fuel filter.

• Replace the air cleaner paper element (more often in dusty, dirty conditions)(Exmark

708cc engine).

• Replace the spark plug (Exmark 708cc engine).

• Change the hydraulic filter and fluid (50 and 60 inch S-Series only) (Every 250 hours if using Mobil 1 15W50) May need more often under severe conditions.

• Charge the battery and disconnect the battery cables.

• Perform all maintenance procedures listed above before storage.

• Paint any chipped surfaces.

• Check the battery charge.

• Inspect the emissions filter.

36

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents