Cleaning. Exmark QUEST QZS708GEM50200


Add to my manuals
72 Pages

advertisement

Cleaning. Exmark QUEST QZS708GEM50200 | Manualzz

Maintenance

Cleaning

Clean Grass Build-Up Under

Deck

Service Interval: Before each use or daily

1.

Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2.

Raise deck to the transport (4 1/2 inch (114 mm) cutting height) position. Lift the front of unit and support unit using jack stands or equivalent support.

CAUTION

Raising the mower deck for service or maintenance relying solely on mechanical or hydraulic jacks could be dangerous. The mechanical or hydraulic jacks may not be enough support or may malfunction allowing the unit to fall, which could cause injury.

2.

Clean all debris from rotating engine air intake screen, around engine shrouding, and exhaust system area.

3.

Wipe up any excessive grease or oil around the engine and exhaust system area.

Clean Debris From Machine

Service Interval: Before each use or daily

1.

Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2.

Clean off any oil, debris, or grass build-up on the machine and cutting deck, especially under deck belt shields, around the fuel tank, around engine and exhaust area.

Do Not rely solely on mechanical or hydraulic jacks for support. Use adequate jack stands or equivalent support.

3.

Clean out any grass build-up from underside of deck and in discharge deflector.

Clean Engine and Exhaust

System Area

Service Interval: Before each use or daily

(May be required more often in dry or dirty conditions.)

CAUTION

Excessive debris around engine cooling air intake and exhaust system area can cause engine, exhaust area, and hydraulic system to overheat which can create a fire hazard.

Clean all debris from engine and exhaust system area.

1.

Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

65

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 708cc Kawasaki engine delivers reliable power and performance
  • 50" cutting deck with 3 blades provides a wide cutting path for increased productivity.
  • Hydrostatic drive system offers precise control and smooth operation
  • Adjustable seat with armrests ensures operator comfort during extended mowing sessions.
  • High-back seat provides lumbar support and reduces operator fatigue.
  • Electric blade engagement for easy and convenient blade activation
  • Large fuel tank allows for extended mowing time without frequent refueling
  • Hour meter tracks operating time for maintenance scheduling and warranty purposes.

Related manuals

Frequently Answers and Questions

What type of engine does the Exmark QUEST QZS708GEM50200 have?
It has a 708cc Kawasaki engine.
How wide is the cutting deck?
The cutting deck is 50 inches wide.
Does the mower have a hydrostatic drive system?
Yes, it has a hydrostatic drive system for precise control and smooth operation.
Is the seat adjustable?
Yes, the seat is adjustable with armrests for operator comfort.
How long can I mow before refueling?
The large fuel tank allows for extended mowing time without frequent refueling.
How do I activate the blades?
The blades are activated by an electric blade engagement system for easy and convenient operation.
What is the purpose of the hour meter?
The hour meter tracks operating time for maintenance scheduling and warranty purposes.

advertisement

Table of contents