advertisement
MicroTAC_Book Page 37 Thursday, October 16, 1997 1:30 PM
Call Timers
About Timers
Call timers provide a useful means of monitoring the air-time spent in conversation. Your phone is equipped with three timers, resettable, individual, and cumulative. These timers operate in the background and can be displayed at any time.
Each timer begins counting as a cellular channel is assigned, or when the phone rings to signal an incoming call. If an incoming call is not answered, the timers revert to their previous values.
Individual Call Timer
To Display
This timer accumulates the air-time of a call in minutes and seconds. It automatically resets before a new call is placed and when the phone is turned off.
Resettable Call Timer
To Display
Press , , , . alternates in display.
To Reset
CLR
This timer accumulates the air-time of all calls in minutes from the point at which it is reset. This resettable timer is generally used to track monthly air-time usage and is set in conjunction with the monthly billing cycle.
Cumulative Call Timer
To Display
Press , , , , . alternates in display.
This non-resettable timer accumulates the phone’s total airtime in minutes, starting with the initial factory setting.
37
Black spot 45.0
°
169.71 LPI
MicroTAC_Book Page 38 Thursday, October 16, 1997 1:30 PM
Call Timers
Automatic Display Timer
This feature allows your phone to display (in minutes and seconds) the accumulated time during and after each call.
To enable/disable the Automatic Display Timer feature, refer to “Selecting and Deselecting Features” on page 32.
38
Black spot 45.0
°
169.71 LPI
advertisement