advertisement
![− DTV Manual Tuning (DTV Mode). Logik L24FE13 | Manualzz − DTV Manual Tuning (DTV Mode). Logik L24FE13 | Manualzz](http://s3.manualzz.com/store/data/056093959_1-d1853f0639b8b3ec4f2b234204d79b5f-360x466.png)
GB
DTV Manual Tuning (DTV Mode)
Allows you to make manual fine tuning adjustments to the channel under DTV mode.
1. Press the MENU button and then press the buttons to select the
CHANNEL menu and then press the OK button.
EXIT
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
2. Press the buttons to select DTV Manual Tuning and then press the
OK button.
CHANNEL
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Channel Edit
Signal Information
CI Information
Software Update
3. The DTV Manual Tuning screen will pop up. Press the buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.
4. Press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
DTV Manual Tuning
UHF CH 5
Bad
Press OK to search
Nomal Good
ATV Manual Tuning (ATV Mode)
Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode.
1. Press the MENU button and then press the buttons to select the
CHANNEL menu and then press the OK button.
EXIT
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
2. Press the buttons to select ATV Manual Tuning and then press the
OK button.
CHANNEL
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Channel Edit
Signal Information
CI Information
Software Update
22
advertisement
Related manuals
advertisement
Table of contents
- 5 Safety Warnings
- 7 Preparation
- 7 Unpacking the TV
- 8 Installing / Removing the Base Stand
- 9 Front / Right Side View and Controls
- 10 Rear View and Sockets
- 11 Installing Batteries in the Remote Control
- 11 Remote Control Operation Range
- 12 Remote Control
- 14 Connections
- 14 Making Video and Audio Connections
- 14 Connecting an AV Device Using an HDMI Cable
- 15 Connecting a Computer Using a VGA Cable
- 15 Connecting an AV Device Using a Component (YPbPr) Cable
- 16 Connecting an AV Device Using a SCART Cable
- 16 Connecting an AV Device Using Composite Cable
- 17 Connecting a Coaxial Audio Receiver
- 17 Connecting Headphones
- 18 Initial Setup
- 18 Turning the TV On for the First Time
- 19 − Target Region Setting
- 19 − Selecting the Input Source
- 20 − Channel Selection
- 20 − Display Channel Information
- 20 − Volume Adjustment
- 21 Customising TV Settings
- 21 Channel Setting (DTV, TV or Radio Mode)
- 21 − Auto Tuning
- 22 − DTV Manual Tuning (DTV Mode)
- 22 − ATV Manual Tuning (ATV Mode)
- 23 − Channel Edit (DTV / ATV Mode)
- 24 − Signal Information (DTV Mode)
- 25 − CI (Common Interface) (DTV Mode)
- 26 − Software Update
- 27 Picture Setting
- 29 Sound Setting
- 30 − Stereo / Dual Sound Reception (ATV Mode)
- 31 Time Settings
- 32 Option Setting
- 32 − OSD Language
- 32 − Audio Language (DTV Mode)
- 33 − Subtitle Language (DTV Mode)
- 34 − Hearing Impaired
- 34 − Country
- 34 − PVR File System (DTV Mode)
- 35 − Restore Factory Default
- 36 − HDMI CEC (Consumer Electronics Control)
- 37 Lock Setting
- 37 − Lock System
- 38 − Set Password
- 39 − Block Channel
- 40 − Parental Guidance