Introduction. Exmark LAZER Z

Add to My manuals
64 Pages

advertisement

Introduction. Exmark LAZER Z | Manualzz

Introduction

CONGRATULATIONS on the purchase of your

Exmark Mower. This product has been carefully designed and manufactured to give you a maximum amount of dependability and years of trouble-free operation.

This manual contains operating, maintenance, adjustment, and safety instructions for your Exmark mower.

BEFORE OPERATING YOUR MOWER,

CAREFULLY READ THIS MANUAL IN ITS

ENTIRETY.

By following the operating, maintenance, and safety instructions, you will prolong the life of your mower, maintain its maximum efficiency, and promote safe operation.

If additional information is needed, or should you require trained mechanic service, contact your authorized Exmark equipment dealer or distributor.

Exmark parts manuals are available online at http://www.exmark.com/manuals.htm

All Exmark equipment dealers and distributors are kept informed of the latest methods of servicing and are equipped to provide prompt and efficient service in the field or at their service stations. They carry ample stock of service parts or can secure them promptly for you from the factory.

All Exmark parts are thoroughly tested and inspected before leaving the factory, however, attention is required on your part if you are to obtain the fullest measure of satisfaction and performance.

Whenever you need service, genuine Exmark parts, or additional information, contact an Authorized

Service Dealer or Exmark Customer Service and have the model and serial numbers of your product ready.

Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided.

Figure 1

1.

Model and serial number location

Model No.

Serial No.

3

Contents

Introduction ........................................................... 3

Safety ..................................................................... 5

Safety Alert Symbol ......................................... 5

Safe Operating Practices .................................. 5

Safety and Instructional Decals ..................... 11

Specifications ....................................................... 15

Model Numbers ............................................ 15

Systems ......................................................... 15

Dimensions................................................... 17

Torque Requirements .................................... 19

Product Overview ................................................ 19

Operation ............................................................. 20

Controls ........................................................ 20

Pre-Start........................................................ 23

Operating Instructions .................................. 23

Transporting ................................................. 27

Maintenance ......................................................... 29

Recommended Maintenance Schedule(s) ........... 29

Periodic Maintenance ....................................... 30

Check Engine Oil Level ................................. 30

Check Mower Blades ..................................... 32

Check Safety Interlock System ....................... 33

Check Rollover Protections Systems (Roll

Bar) Knobs................................................ 33

Check Seat Belt.............................................. 34

Check for Loose Hardware ............................ 34

Service Air Cleaner ........................................ 34

Change Engine Oil ........................................ 34

Check Hydraulic Oil Level ............................. 34

Check Tire Pressures ..................................... 35

Check Condition Of Belts.............................. 35

Lubricate Grease Fittings............................... 35

Lubricate Brake Handle Pivot ........................ 36

Lubricate Deck Lift Pivot............................... 36

Check Spark Plugs ......................................... 36

Change Hydraulic System Filter and

Fluid ......................................................... 37

Wheel Hub - Slotted Nut Torque

Specification.............................................. 37

Check Engine Coolant Level (Kawasaki

Liquid-Cooled Only) ................................. 38

Change Engine Coolant (Kawasaki

Liquid-Cooled Only) ................................. 38

Check Spark Arrester (if equipped)................. 39

Thread Locking Adhesives............................. 39

Copper-Based Anti-seize .............................. 40

Dielectric Grease........................................... 40

Adjustments ..................................................... 40

Deck Leveling ............................................... 40

Pump Drive Belt Tension............................... 42

Deck Belt Tension ........................................ 42

Adjusting the Parking Brake........................... 42

Electric Clutch Adjustment............................ 44

Motion Control Linkage Adjustment ............. 45

Motion Control Damper Adjustment............. 46

Motion Control Neutral Lock Pivot

Adjustment ............................................... 46

Motion Control Handle Adjustment .............. 46

Motion Control Full Forward Tracking

Adjustment ............................................... 47

Caster Pivot Bearings Pre-Load

Adjustment ............................................... 47

Cleaning ........................................................... 48

Clean Engine and Exhaust System

Area .......................................................... 48

Remove Engine Shrouds and Clean Cooling

Fins........................................................... 48

Clean Hydro Fan Cooling Fins ....................... 48

Clean Debris From Machine .......................... 48

Clean Grass Build-Up Under Deck ................ 48

Waste Disposal .............................................. 49

Troubleshooting ................................................... 50

Schematics ........................................................... 53

4

advertisement

Key Features

  • Powerful engine for superior cutting performance
  • Durable deck for long-lasting use
  • Variety of cutting widths to meet your needs
  • Intuitive controls for easy operation
  • Easy maintenance for less downtime
  • Excellent cutting performance for a beautiful lawn

Related manuals

Frequently Answers and Questions

What is the difference between the LAZER Z and other zero-turn mowers?
The LAZER Z is a commercial-grade mower that is built to last. It has a more powerful engine, a more durable deck, and a wider range of cutting widths than most other zero-turn mowers.
How do I choose the right cutting width for my needs?
The right cutting width for you depends on the size of your lawn. If you have a small lawn, a 42-inch cutting width will be sufficient. If you have a larger lawn, you may want to choose a 48-inch or 52-inch cutting width.
How do I maintain my LAZER Z mower?
The LAZER Z mower is easy to maintain. Simply follow the maintenance schedule in the owner's manual.