Maintenance. Exmark LAZER Z

Add to My manuals
64 Pages


Maintenance. Exmark LAZER Z | Manualzz



Note: Determine the left and right sides of the machine from the normal operating position.


While maintenance or adjustments are being made, someone could start the engine.

Accidental starting of the engine could seriously injure you or other bystanders.

Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).


The engine can become very hot. Touching a hot engine can cause severe burns.

Allow the engine to cool completely before service or making repairs around the engine area.

Recommended Maintenance Schedule(s)

Maintenance Service


After the first 5 hours

After the first 100 hours

Before each use or daily

Every 50 hours

Every 100 hours

Every 200 hours

Every 250 hours

Maintenance Procedure

• Change the engine oil.

• Check the wheel hub slotted nut torque specifications.

• Check the wheel lug nuts.

• Check the park brake adjustment.

• Check the engine oil level.

• Check the mower blades.

• Check the safety interlock system.

• Check the rollover protections systems (roll bar) knobs.

• Check the seat belt.

• Check for loose hardware.

• Check engine coolant level.

• Clean the engine and exhaust system area.

• Clean the hydro fan cooling guards.

• Clean the grass and debris build-up from the machine and cutting deck.

• Clean the grass build-up from under the cutting deck.

• Check the hydraulic oil level.

• Check the tire pressures.

• Check the condition of the belts.

• Check spark arrester (if equipped).

• Change the engine oil. (May need more often under severe conditions.)

• Lubricate the deck lift pivots.

• Remove the engine shrouds and clean the cooling fins.

• Lubricate the brake handle pivot.

• Check the spark plugs.

• Replace the primary air cleaner element — check secondary air cleaner element; replace if dirty. (May need more often under severe conditions. See the Engine Owner’s Manual for additional information.)



Key Features

  • Powerful engine for superior cutting performance
  • Durable deck for long-lasting use
  • Variety of cutting widths to meet your needs
  • Intuitive controls for easy operation
  • Easy maintenance for less downtime
  • Excellent cutting performance for a beautiful lawn

Related manuals

Frequently Answers and Questions

What is the difference between the LAZER Z and other zero-turn mowers?
The LAZER Z is a commercial-grade mower that is built to last. It has a more powerful engine, a more durable deck, and a wider range of cutting widths than most other zero-turn mowers.
How do I choose the right cutting width for my needs?
The right cutting width for you depends on the size of your lawn. If you have a small lawn, a 42-inch cutting width will be sufficient. If you have a larger lawn, you may want to choose a 48-inch or 52-inch cutting width.
How do I maintain my LAZER Z mower?
The LAZER Z mower is easy to maintain. Simply follow the maintenance schedule in the owner's manual.