Check Mower Blades. Exmark LAZER Z

Add to My manuals
64 Pages

advertisement

Check Mower Blades. Exmark LAZER Z | Manualzz

Maintenance

Figure 20

1.

Positive (+) cable on discharged battery

2.

Positive (+) cable on booster battery

3.

Negative (–) cable on the booster battery

4.

Negative (–) cable on the engine block

5.

Booster battery

6.

Discharged battery

7.

Engine block

Figure 21

1.

Install bushing in blade prior to installing bushing in spindle.

B. Install bushing/blade assembly into spindle.

Make sure the splines on the bushing are engaged in the spindle before tightening the bolt.

4. Connect the other end of the positive cable to the positive terminal of the booster battery.

5. Connect the black negative (–) cable to the other terminal (negative) of the booster battery.

6. MAKE THE FINAL CONNECTION ON

THE ENGINE BLOCK OF THE STALLED

VEHICLE (NOT TO THE NEGATIVE POST)

AWAY FROM THE BATTERY. STAND BACK.

7. Start the vehicle and remove the cables in the reverse order of connection (the engine block

(black) connection is the first to disconnect).

Check Mower Blades

Service Interval: Before each use or daily

1. Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2. Lift deck and secure in raised position as stated in the Clean Grass Build-Up Under Deck section.

3. Inspect blades and sharpen or replace as required.

4. Reinstall the blades (if they were removed) in the following order:

A. Install bushing through blade with bushing flange on bottom (grass) side of blade.

Figure 22

1.

Use wrench here for blade installation. This nut has been torqued to 140–145 ft-lb (190–197 N-m)

2.

Torque to 55-60 ft-lb (75-81 N-m) Apply lubricant to threads as needed to prevent seizing. Copper-based anti-seize preferable. Grease acceptable substitute.

C. Apply lubricant to threads of blade bolt to prevent seizing. Copper-based anti-seize preferable. Grease acceptable substitute.

Install blade bolt finger tight. Place wrench on the top spindle nut then torque the blade bolts to 55-60 ft-lb (75-81 N-m).

32

advertisement

Key Features

  • Powerful engine for superior cutting performance
  • Durable deck for long-lasting use
  • Variety of cutting widths to meet your needs
  • Intuitive controls for easy operation
  • Easy maintenance for less downtime
  • Excellent cutting performance for a beautiful lawn

Related manuals

Frequently Answers and Questions

What is the difference between the LAZER Z and other zero-turn mowers?
The LAZER Z is a commercial-grade mower that is built to last. It has a more powerful engine, a more durable deck, and a wider range of cutting widths than most other zero-turn mowers.
How do I choose the right cutting width for my needs?
The right cutting width for you depends on the size of your lawn. If you have a small lawn, a 42-inch cutting width will be sufficient. If you have a larger lawn, you may want to choose a 48-inch or 52-inch cutting width.
How do I maintain my LAZER Z mower?
The LAZER Z mower is easy to maintain. Simply follow the maintenance schedule in the owner's manual.