Hardware Installation. AOpen CRW 1232

Add to My manuals
26 Pages


Hardware Installation. AOpen CRW 1232 | Manualzz

Software Installation


Hardware Installation

The installation of AOpen USB2.0 DVD+RW/+R drive is fast and easy. Please follow these instructions described below:

3.1. System Requirements

A PC system with the following features is highly recommended for ensuring a stable

DVD+RW/+R performance.

System requirements

CPU We suggest using a Pentium !!! 850MHz or above (JustLink in use)


Operating systems

128MB or above

Windows 98, Windows 2000, XP

Windows Me, NT WorkStation 4.0 Service

Pack 5 or above

Interface USB2.0

Hard disc


Average saving time is 19ms or lower, max data transfer speed is 33.3MB/sec; disc space 500MB or over

+12V or +5V voltage switches

*CD-RW discs: perhaps are unable to be read in the CD-ROM. If this situation

comes about it is likely that your CD-ROM is not compatible with multi-read please

change to a Multi-read compatible CD-ROM or use your AOpen DVD+RW/+R.

*All Multi-read CD-ROM devices have the following features

(1) CD-ROM is able to read data created by optical heads

(2) CD-ROM will support the UDF specification (Packet Writing)

-- E-6 --


Related manuals