Quick Start Guide. Marshall Electronics AR-AM4, four-channel stereo analog audio monitoring system.


Add to my manuals
12 Pages

advertisement

Quick Start Guide. Marshall Electronics AR-AM4, four-channel stereo analog audio monitoring system. | Manualzz

Quick Start Guide

1. Connect an Audio Source

Connect an audio source to any of the 4 pairs of rear panel input connectors. We recommend the use of the

Balanced XLR female connectors using a balanced audio signal with a nominal level of +4dBu.

2. Power On the Audio Monitor

Supply power to the audio monitor by connecting the included power supply to an AC power source (100-240 V @

50/60 Hz) and connecting the power supply’s 4-pin XLR connector to the back of the audio monitor. The Power LED on the front panel will illuminate green.

3. Select Input Channel

Use the Input Select controls to choose one of the four inputs.

4. Adjust the Volume and Balance

Use the Volume and Balance controls to adjust the sound level and stereo balance.

6

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement