Chapter 4. Monitoring. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960C

Add to my manuals
122 Pages

advertisement

Chapter 4. Monitoring. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960C | Manualzz

User Manual

Chapter 4. Monitoring

When power is supplied to the DVR, images from all channels connected via analog are displayed on the screen in monitor mode. This chapter describes all DVR features in monitor mode.

-

The DVR automatically powers on when the power cord is plugged in.

-

While the DVR is booting up, all LEDs blink on and off in sequence.

-

Once it finishes booting up, the default 16 channel split-screen is displayed (9 channel split-screen for SVR-960C/945, 4 channel split-screen for SVR-480).

If a password for the unit has been set, the password input dialog is displayed.

4.2 Single Display Full Screen

-

Press a channel button or left-click.

-

Press the [MULTI] button or left-click once again to go back to the split-screen.

4.3

Multi Display

-

To watch multiple channels simultaneously, press the [MULTI] button or the button from the Function menu and click split mode.

-

Each press of the [MULTI] button toggles between 4A, 4B, 4C, 4E, 9A, 9B, 10A and 16 channel split-screen modes. The SVR-960C/945 supports 4A, 4B, 4C, 4E, 9A and 9B,

SVR-480 supports 4A.

4.4

Auto Sequencing

To go into auto sequencing mode, set 1 to 16 in the auto sequencing setup or set the desired channels and then press the [AUTO] button on the front or the button from the Function

37

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents