Evnet Record Setup. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960CAdd to my manuals
When you set the region of time, you may not include the existing time that is set previously.
Repeat Record Mode
When there is no more space for recording to hard disk, recorded data is removed from the foremost portion automatically.
This checks the capacity of all disks connected to the DVR and gives a warning when the specified level is met.
Recorded Data Retention
This shows videos recorded only on specified dates in hard disk.
For example, if the entire video is recorded for 10 days (Drawing 1) and only 2-day recording
(Drawing 2) is specified for playback, only the 2-day recording is available for playback.
This turns playback deinterlace on or off.
This is available only when the recording resolution is set to Full D1. If this is set to On, imaging shaking decreases while Full D1 video is paused.
6.5.3 Evnet Record Setup
This menu item is used to record video based on events. To use Event Recording, select a resolution, frame rate, and quality from the available 26 programs.
Event recording is divided into recording by sensor, by motion detection, by text and by digital input. In the Programs settings, select a program first. If you want to adjust the details of a program, select the program and then adjust the resolution, frame rate, and quality. (For more information, please refer to section 6.6.1 on Program Settings.)
Event Recording is used mostly in conjunction with other recording options: Manual & Event and Schedule & Event.
Go to [Record Setup] > [Record]. In "Record Mode," select Manual & Event or Schedule &
To use Event Recording only, please refer to the following instructions.
1. In Record Mode, select Manual & Event or Schedule & Event.
2. In the Program settings, change the frame rate of Normal Recording to 0 and
of vent Recording to the desired rate.
3. Set an Event Check to activate the recording.
Event Check Settings
This menu item sets times for event recording and has the options of Always, Disable and
Timezone. The "Always" option always detects events while the "Timezone" option uses events only for specified hours. When Timezone is selected, a setup similar to schedule setup is possible; the event check time can be set by the hour.
• INDEX : 1~50 different programs can be set
• Day: designate recording date
• Time: designate recording time
• Delete: delete the desired INDEX
As you set INDEX, DAY, and HOUR, then the content will be immediately displayed in the table.
If you select the start time and the stop time for recording in the table and click on them in order, the content will be displayed in INDEX, DAY, and HOUR.
Select the desired INDEX and then click on the Delete button. If you click on the Delete button before selecting INDEX, then the content of INDEX that was selected previously will be deleted first. After that, the content in the highest INDEX will be deleted and then others
INDEX will be deleted in the increasing order of INDEX.
Select the INDEX to be edited and then change DAY, and HOUR on your own.
If all the INDEX fields up to INDEX 50 are already set, then click on the time in the table to be edited with your mouse. Click on the hour in the table to be changed, again with your mouse.
The previous setting will be deleted and overwritten with the change that you have just made.
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project