Audio Mixing. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960CAdd to my manuals
This menu is used to select audio for live video feeds. If All is set, all inputted audio is mixed for output regardless of channel selection. If specific audio is selected, only the specified channel is outputted regardless of the channel selection.
6.7 General Event Setup
This menu is used to set events that you want to use.
Motion Detection Setup
This menu is used to save events occurring through motion detection for each channel.
SVR-480 does not support Digital I/O
This enables each channel or all channels to detect motion and notify users.
Channel can be set to All or as follows.
SVR-480 : 1~4CH
Sensitivity can be set to Lowest, 1~10, or Highest for each channel.
Area is used to set the motion detection area.
If Channel is set to All, Area can be set to Set All or Unset All. When each channel is set individually, Area can be set to Set All, Unset All or User Defined.
- User Defined
User Defined is only available when each channel is set individually. It is used to set an area where you want to detect motion intensely.
It allows you to set a user-defined motion detection area. You can select one or more motion detection areas out of the
The default setting is "Set All". Press the [Area Setup] button to open the motion detection area setup window.
Users can specify motion detection areas on the screen.
The setup window composed of
in a 22x15 grid appears. Squares set as motion
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project