Digital I/O. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960C

Add to my manuals
122 Pages

advertisement

Digital I/O. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960C | Manualzz

User Manual

6.7.3 Digital I/O

Digital I/O are digital ports available for input and output at the same time., There are 12 digital inputs and outputs.

Digital I/O Channel & Input/Output

All 12 channels can be set to input/output. When channels are set to input, if an input signal is received by even one channel, emergency recording will operate. When they are set to output, if sensor input is received, it will operate.

In Digital I/O Setup, if you set one of the 12 Digital I/O to [Input], set Input Type to [Emergency] and turn Digital I/O on, the emergency recording will operate. The macro set in the event recording is used for the recording. The recording will continue based on the value set in

[Recording After Event] under Event Recording and then stop.

SVR-480 does not support Digital I/O.

73

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents