Event Action. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960CAdd to my manuals
6.7.4 Event Action
This sets actions based on event input.
For Event Action, you can select Relay 1~4, buzzer, or E-Mail.
Action Duration is used to maintain an action for a specified time when relay or buzzer is set. If
E-Mail is set, e-mails are sent in specified time intervals.
Normal Event Source
You can set Normal Event Source to 16 Sensors, 16 MDs, 16 Video Losses and Text,
SVR-480 does not support Digital I/O, thus it does not display “Emergency” on select mode.
System Event Source
This sets some or all of disk error, disk full, fan error, authentication failure and DDNS registration failure.
E-Mail address is set when e-mail is used for output.
For e-mail address, enter an e-mail address for a message recipient.
The address format is [email protected]. However, only Roman alphabet letters and numbers are allowed.
- Sender Address
Sender Address is set when e-mail is used for output. The address format is [email protected]. You do not have to enter an e-mail address. In general, use an address that identifies the e-mail as being sent from a specific DVR.
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project