Security. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960C

Add to my manuals
122 Pages

advertisement

Security. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960C | Manualzz

User Manual

Size(MB)

Enabled

: Displays HDD sizes in MB.

: Enables or disables HDDs.

Yes: Enabled / No: Disabled

To change HDD to Yes

-

Enabled

: Select No and press the [Enter] button or use the mouse wheel to open the notice window with the following message.

- "Warning: This disk is usable without being formatted. Do you want to format the disk anyway?"

- Select

No

to keep the previous data stored in the HDD and change it to Enabled-Yes.

- Select

Yes

to delete the previous data stored in the HDD and change it to Enabled-Yes.

To change HDD to No

-

Enabled

: Select Yes and press the [Enter] button or use the mouse wheel to open the notice window with the following message.

- "Warning: Do you want to remove the disk?"

- Select

Yes

to open the "The disk has been removed." message and change the HDD to

Enabled-No.

- The HDD is now unused.

- Select

No

to keep the HDD as it is.

Disk Status

This displays the temperature and status for each HDD.

6.9.3 Security

DVR users are divided into administrators and general users. Administrators can use all DVR

95

User Manual

features without any limitations. The maximum number of users is 10. They can only use features that they have permissions for.

Right

In Right Setup, if Check is set to all X, all users can use all features without any limitations.

If Check is set to all O, each user can use only features for which they have been given permissions.

In the image above, User 1 & 2 can use only “O” function. You can set User 1 to User 10 in the same way.

Admin Password

The default Admin Password is "11111111" and can be changed. The Admin Password should be an 8-digit number.

User Password

User 1's password is "11111111", User 2's is "22222222", and similarly for User 3 to User 9. User

96

User Manual

10's password is "00000000". The 16 channel-DVRs do not have a [0] (zero) button so they use the [10] (ten) button instead.

Change Password

As shown in the image below, click Change P/W for a user you want to change.

The password input window appears. Use the number buttons on the front or the character input window to enter a new password.

Click the [Change] button to save it.

Clicking the [Change] button displays a popup confirmation window that prompts you to change password. Click Yes.

The password has been changed.

Permissions

Using permission restricted features requires a password check. Execute a command to open the password input window. Select a user and enter his/her password. Now the function is available.

[Permission check]

6.10 Exit

This exits with or without saving menu settings.

97

User Manual

Save

This saves all settings and exits to the live screen.

Select Yes to save all settings and exit, or select No to exit without saving any settings.

Do not save

This is used to exit without saving any settings.

98

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents