PTZ Use. Samsung svr-945, svr-1680c, SVR-1645, svr-480, SVR-PC, SVR-3200, SVR-1660C, SVR-960CAdd to my manuals
from and select "Save As". To confirm the saving operation, go to the directory the image is saved to and double-click the image.
7.5.9 PTZ Use
While monitoring, right-clicking on a channel supporting PTZ and selecting "PTZ" will allow the user to manipulate the camera position.
Pan, Tilt Control
To control PTZ, right-click the channel to manipulate and select "PTZ". A white cross will appear at the center of the screen. Click on the screen to manipulate camera position. Clicking left or right of the cross will pan the camera and above or below will tilt it. Clicking further from the camera will cause the camera to change its position faster.
Zoom, Focus Control
Placing the cursor at the left and right sides of the screen will reveal the zoom and focus slide bars. A camera unit supporting Area Zoom In will also support the Zoom Zero button. Use the slide bar to the left to zoom in and out and the right slide bar to control focus.
If a preset position is configured, right-click during PTZ mode and select the desired preset position from "Goto Preset". The camera will move to the preset position. Preset positions must have been configured beforehand.
If a preset position has been configured, the pop-up menu will also contain "Auxiliary". Selecting the item will perform the assigned action.
For detailed explanation of the PTZ function and the list of supported cameras, please refer to "4.8 Manipulating PTZ".
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project