Information Bar. Monster Go-DJ


Add to my manuals
75 Pages

advertisement

Information Bar. Monster Go-DJ | Manualzz

OVERVIEW

information Bar

An information bar is located at the top of both screens. The information bar displays current information regarding track names, icon notifications, track progress bar, and track time information.

Track Progress Bar

The Progress Bar displays the playback position of the loaded track. By tapping and dragging the tip of the progress bar, you can jump to a desired playback position. This is also referred to as a “needle drop.”

Please note: The progress bar can be tapped and dragged in the Digital

Turntable screen.

Time Information

The Time Information window displays the time information of the loaded track.

By tapping the Time Information window, you can toggle between Time Left and Elapsed Time.

Icon Messages

The following table is the key to the graphic icons in the Monster ® GO-DJ ™ :

Icons Function

Battery Level

Digital Turntable Shortcut

Headphone Monitor Toggle

Headphone Monitor Toggle

Description

Displays the current power level of the internal battery.

Tap to automatically go to the Digital

Turntable screen.

Displays that the current track on the respective channel is cued and playing on both sides of the headphones.

Displays that the current track on the respective channel is cued and playing on the Left side of the headphones.

Icons Function

Headphone Monitor Toggle

Headphone Monitor Toggle

Description

Displays that the current track on the respective channel is cued and playing on the Right side of the headphones.

No output to the headphones.

Headphone Monitor Toggle

FX Function (PH)

FX Function (FL)

FX Function (DL)

FX Function (VCF)

FX Function (RL)

FX Function (BC)

FX Function (OFF)

Audio from the LINE-OUT jack (master mix) is output to the Headphones jack.

Displays that the FX SELECT has been set to Phaser.

Displays that the FX SELECT has been set to Flanger.

Displays that the FX SELECT has been set to Delay.

Displays that the FX SELECT has been set to Filter.

Displays that the FX SELECT has been set to Roll.

Displays that the FX SELECT has been set to Bit Crusher.

Toggle to turn off all FX.

13

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents