Add to my manuals
75 Pages


HOW TO PREPARE MUSIC. Monster Go-DJ | Manualzz

HOW TO PREPARE MUSIC how to Load Files

There are three (3) ways to load music into your Monster ® GO-DJ ™ :

1 . Computer and Connector Cable

2 . SD Card Drive

3 . Monster ® Intelligent Stream Technology.

how to Connect to a Computer with the Connector Cable

Connect the Monster ® GO-DJ ™ with a PC or Mac using the Connector Cable.

Connect the USB jack to the computer and the Mini-USB jack into the top of the Monster ® GO-DJ ™ .

Once connected, go to the “Options” screen on your Monster ® GO-DJ ™ , select the “System” tab, and turn ON the “USB Storage Mode.”

Once the “USB Storage Mode” connection has been established, your computer will recognize four (4) external drives:

• GO-DJ ™ Drive: The “GO-DJ Drive” directory is located in the internal memory, where you can store your music and audio samples.

• GO-DJ ™ Recorded: The “GO-DJ Recorded” directory is located in the

Monster ® GO-DJ ™ internal memory, where you can store your recorded track(s) on the Monster ® GO-DJ ™ .

• GO-DJ ™ Manual: The “GO-DJ Manual” directory is located in the Monster ®

GO-DJ ™ internal memory, where the official Monster ® GO-DJ ™ manual(s) are conveniently stored for your reference.

• SD Card: Your computer will recognize the volume label of the SD card that is inserted into the Monster ® GO-DJ ™ SD card drive, where you can store your music and audio samples.

Once you have finished transferring your files, you can end the connection by tapping on the “Cancel” button. This will disconnect the Monster ® GO-DJ ™ from your computer.

Note: It is recommended to properly eject the Monster ® GO-DJ ™ drive from your computer first before turning off the connection on your Monster ® GO-DJ ™ .

how to Use the SD Card Drive

You can store your music and audio files on an SD memory card. To use your

SD memory card with your Monster ® GO-DJ ™ , insert the SD memory card into the Monster ® GO-DJ ™ SD card slot, which is located on the right side of the

Monster ® GO-DJ ™ . You can preload the SD memory card with audio files, such as your music and sample files, for playback with the Monster ® GO-DJ ™ .

Note: The Monster ® GO-DJ ™ recognizes up to a maximum of 32 GB for SD car memory.

Compatible File Types

The Monster ® GO-DJ ™ can recognize and playback two (2) digital file formats:

MP3 (44.1 kHz stereo, up to 320 kbps) and WAV (44.1 kHz, 16-bit, stereo). The

Monster ® GO-DJ ™ does not recognize file names that start with a period/dot (.).

intelligent Stream Technology

The Monster ® GO-DJ ™ is compatible with third-party audio devices that can be connected with analog audio cables via the LINE IN jack.

Compatible third-party audio devices include, but are not limited to, the following: iOS devices (e.g., iPod, iPhone, iPad), Mac OS devices (e.g., Macbook

Pro), Android devices (e.g., Android smartphones, Android tablets), PC, musical instruments, digital multimedia players, etc.

Once you connect the third-party audio device with the Monster ® GO-DJ ™ via the LINE IN jack, swipe to the File Browser Screen. In the main directory, also known as parent, choose the LINE IN option. You can choose the LINE IN input by either double-tapping on the touchscreen or using the corresponding




Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals


Table of contents