Add to my manuals
75 Pages


EQUALIZER SCREEN. Monster Go-DJ | Manualzz


In the Equalizer screen, you can adjust the output levels of the 3 bands

(i.e., low, middle, and high) on each track. You can also change the gain level of each track.

Basic operations of the equalizer

Touch Panel Operation Analog Control Operation

The Equalizer screen can be operated by the touchscreen interface. By moving the sliders up and down, the output level of each band can be controlled.

When RESET is touched, the output level is reset to 0 dB.

Please note: The Equalizer screen supports multi-touch function, which means that two or three sliders can be moved simultaneously.

The Equalizer screen can be operated by the analog controls. You can rotate the FUNCTION knob to change the levels of the Equalizer. Rotating the

FUNCTION knob affects all three bands (i.e., low, mid, and high). You can isolate bands by tapping the kill switch. You can reset the levels by pressing the ANALOG knob.



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals


Table of contents