Firmware Recovery Menu. Monster Go-DJ

Add to my manuals
75 Pages


Firmware Recovery Menu. Monster Go-DJ | Manualzz


Firmware Recovery Menu

In the recovery menu screen, you can rotate the FX SELECT knob to select a menu item.

You can press the FX SELECT knob to execute the selected menu command.

For a Mandatory Firmware Update with an SD card, select and execute the

"Recovery from SD" command. If the firmware in the SD card is properly installed, then the Monster ® GO-DJ ™ will reboot.

The firmware version is shown on the right side of the menu item.

The other menu item functions include the following:

• Normal Boot: Boots normally with the firmware currently installed

• Recovery from GO-DJ DRIVE: Reboots after installing the firmware stored in the GO-DJ DRIVE

• USB mode: Starts to wait to be connected with a computer as well as

USB Storage Mode in the Options screen

• Initialize Database: Deletes the preserved data and settings

• Initialize Internal Disk: Deletes all files in the internal drive and resets to factory default

• Power Off: Shuts down the Monster ® GO-DJ ™


© 2014 Monster, LLC

7251 West Lake Mead Blvd. • Las Vegas, NV 89128

Monster Technology International, Ltd .

Ballymaley, Business Park • Gort Road, Ennis, Co. Clare, Ireland

Monster, the M Monster logo, GO-DJ and the GO-DJ logo are trademarks or registered trademarks of Monster, Inc . and its subsidiaries in the U .S . and other countries . Used under license .

Manufactured and Distributed by JD Sound, Inc .


85412, Corporate Collaboration Center,

Sungkyunkwan Univ . Natural Sciences Campus

Cheoncheon-dong Jangan-gu, Suwon-si Gyeonggi-do, Korea

Phone : 070-4405-0494

E-mail : jdsound@jdsound .co .kr

Homepage : www .jdsound .co .kr


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals


Table of contents