advertisement
Users_Book Page 6 Wednesday, July 23, 1997 11:25 AM
Basic Operation
Placing a Call
1. With power on, enter the number you wish to call.
diALing and the dialed number will alternate in the display until the called party answers.
3. Begin the conversation when the called party answers.
To Correct an Error
To correct an error, press and quickly release CLR to delete the last character. To clear the entire entry, press and hold
CLR for about 1 second. Your entire entry will be deleted, and you may now re-enter the number you wish to call.
If Entering More Than 10 Digits
You can call a phone number with up to 16 digits, but only the last 10 digits will appear in the display.
To recall a stored phone number that is longer than 10 digits, press RCL and the memory location number. The display will flash the memory location number and the last
10 digits of the number. Press number.
RCL again to view the entire
6
advertisement