Affinity 2.0
Additional Information Page 330
3.10 The HIT440 Menu Items
The HIT440 Menu gives you access to File, Edit, View, Mode, Setup, and Help .
1) Menu/Print
Menu/Print/Print
will prompt the system to print using the selected print template (see section 4).
Menu/Print/Print Preview prompts a print preview of the current test protocol using the print template which is linked to the current protocol. Note that you are prompted to select a template if
the protocol did not include a template (see how to create a print layout in section 0).
Menu//Print/Print Layout opens the print wizard window from where you can select or create a template to print the current test protocol (see section for details regarding the Print Wizard).
2) Menu/Edit/Export
Menu/Edit/Export will prompt the system to export the session as an XML formatted file.
3) Menu/View
Menu/view/Save window position will save the current position of the HIT440 window on the PC screen so that it opens at this exact position every time. This is for example practical if you are usually running and viewing other software modules (such as fitting software) at the same time.
Using this function for moving and/or resizing of the HIT440 will only be necessary once.
4) Menu/Mode
Menu/Mode/Single measurement will set the system to present the selected stimulus as a single sweep.
Menu/Mode/Continuous measurement will set the system to present the selected stimulus continuously.
Menu/Mode/Single frequency mode will set the system to perform the a test at a single frequency.
Menu/Mode/Endless loop will set the system to perform the tests of the test protocol continuously until tolerance limits specified in the setup are overstepped.
Menu/Setup
Menu/Setup/HIT440 setup opens the HIT440 where you can setup customised test protocols (see
section 0 for details)
Menu/Setup/General setup opens the General setup where settings valid for all tests can be
selected (see section 0 for details).
Menu/Setup/Temporary setup opens the Temporary setup where temporary settings for the
specific session can be selected (see section 0 for details)
Menu/Setup/Password protection allows you create or change a password and thereby protect your HIT440 settings. Press Change password and type in the preferred password. Then press
OK. Note that your password needs to be activated in Protected settings under
Menu/setup/General setup (see section 0).
Menu Setup/Show/hide protocols prompts a screen allowing you to tick test protocols which are to be shown in the List of Protocols and untick the test protocols which are to be hidden.
Menu/Setup/Language opens the language selection. Choose from English, German, Spanish,
French, Italian, Japanese, Portuguese, and Chinese (People’s Republic of China) . The system must be restarted in order for a new language selection to take effect.
Affinity 2.0
Additional Information Page 331
Menu/Setup/General Suite Settings launches a screen where the user can choose which module should start up, the examiner options and the choice to change the language. Please note that changing something in this screen will affect all active modules, not just the HIT module.
5) Menu/Help
Menu/Help/About HIT440 prompts a message box showing information regarding the Suite version, Hardware version, and Firmware version . Please note that if experiencing problems with the system this information should be sent to the manufacturer along with the description of the issue. (Your instruments serial number will also be required).
Note: Press License in order to be able to type in a new license code.
