When placing the main unit in a rack or on a table. Panasonic SC-HTB690, SCHTB690GN, SCHTB690EB, SCHTB690EG

SC-HTB690-SQT0852.book 15 ページ ２０１５年４月２８日　火曜日　午前９時５４分

When placing the main unit in a rack or on a table

Additionally required accessories (commercially available)

≥

Fall prevention cord ..................................................................................................................... k

2

≥

Screw eyes (to attach the fall prevention cord) ............................................................................ k

2

≥

Use commercially available screws that are capable of supporting over 26 k g .

≥

Use a cord that is capable of supporting over 26 k g

(with a diameter of about 1.5 mm).

≥ Lay the unit on a blanket or soft cloth for assembly.

1 Attach the cord to the main unit.





A

Cord

§

§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 5 mm apart from the tip, at an angle of 45 o (as illustrated above).

2 Place the main unit in the desired position and attach each cord onto the rack or table.

≥ Make sure that the slack of the cord is minimal.

≥ Do not lean the main unit against the TV or wall.



B

Screw eye

≥ Attach at a position capable of supporting over 26 k g .

≥ Depending on the placement of the main unit, the screwing position of the screw eye may differ.

SQT0852

15