3. Adjusting the Fan Speed. Panasonic CS-KE24NKU, CS-KE18NKU

NOTE

OPERATION WITH THE REMOTE CONTROLLER (CONTINUED)

• Choose the best position in the room for the remote controller, which also acts as the sensor for room comfort and transmits the operating instructions. Once you’ve found this best position, always keep the remote controller there.

• This appliance has a built-in 5-minute time delay circuit to ensure reliable operation. When the operation button is pressed, the compressor will start running within three minutes. In the event of power failure, the unit will stop.

3. Adjusting the Fan Speed

A. Automatic fan speed

B. Manual fan speed

Simply set the FAN SPEED selector button to the position.

This automatically sets the best fan speed for the room temperature.

If you want to adjust fan speed manually during operation, just set the FAN

SPEED selector button as desired. [ , , or ]

4. Fan Only

STEP 2

STEP 1

STEP 3

If you want to circulate air without any temperature control, follow these steps:

STEP 1 Press the MODE selector button to switch to the fan mode .

STEP 2

STEP 3

Press the ON/OFF operation button.

Press the FAN SPEED selector button to select the fan speed of your choice ( , or ).

14